Retractable Transom Pylon - Group Buy

[super01]

I'm sure that Rick will be happy to have your order. Have you contacted him?

[intrlaz]

My 2002 Sante is within the measurements specified. If the buy is still open I'm in.

[intrlaz]

I am interested, just need to take the measurements. Also, mine will be used in brackish water. Will the hardware be stainless?

[sjames]

I want in

I am going to re-measure as I came up with 24in from the bottom rail to the top of the deck for my 2006 220 SANTE. I need to get the second dimension for the mid bar.

[EchoLodge]

For those with 99's I measured and found my cross-member bar to be 12 inches and not the 9.75 as required. Rick is checking to see if it will work for me!

[tachyon]

Flynn51, I'd have to see some photos and measurements. If you can check with the PDF CAD print in this thread and see if your dimensions fall within the proper range, that will be a good start. Unfortunately I don't have any 211's around that I can go and check in person.

I will PM the rest of the group today with further details - below is the final list:

1. Super01 2001 SAN
2. Echolodge 1999 SS
3. MNSuperAir 2001 SAN
4. OUT ----> Chexi 2000 SAN
5. Garrettaday 2002SANTE
6. GoBig 2003 SAN

[flynn51]

Just picked up on this thread and buy, will this fit a 211 if so i"m in.

[Chexi]

I have to drop out due to my boat budget being blown by the need for a hyrdofoil rack. Sorry all.

[tachyon]

If you take measurements and it is out of the tolerance shown in the print above, please email me a few snapshots of the area & I will follow up with you. I may be able to make some slight modifications to accommodate your boats - BUT please keep in mind, this has to be done BEFORE I produce the parts. Once the parts are cut, I cannot make alterations...or at least I can't make anything 'larger'.

As for the 2007 model, I do not believe this will fit, but if you want to take some measurements and photos (try to show a tape measure in the photos), I will see if there is something I can do.

For this group buy, returns are not accepted.

Please call if you have any questions, or if your seatback is not the same as shown in the video - or if ANY of the dimensions are out of range from the print shown in the post above. Normally I have a no questions asked return policy, but these units are very time intensive, and have a very limited application.

At this point, given the limited interest, I am not planning to stock these parts in the future - so if you have any interest in this product, now is the time to get onboard & get the info needed to see if it is going to fit properly, etc... you won't want to miss out on this offer.

The current count (including tentative orders) is (6):

1. Super01 2001 SAN
2. Echolodge 1999 SS
3. MNSuperAir 2001 SAN
4. Chexi 2000 SAN
5. Garrettaday 2002SANTE
6. GoBig 2003 SAN

Thanks!

Rick

[lucky7t]

Any chance this will work on my 2007 to replace where the rear pop up tow ring is?
Let me know please as I'm in if it works

[GoBig]

I would be in if there is some sort of return guarantee if it doesn't fit. Count me in in the meantime and I'll email Rick separately about the return policy.

[garrettaday]

Measurements seem a little off from my 2002 SANTE. What's the return policy? Also, how close are we to the 12 needed for the knobs?

[Chexi]

Possibly interested. I need to take some measurements this week. I will know more by the weekend. 2000 SAN.

[super01]

One more update...with 10 days left in the group buy, Tachyon has sweetened the deal! If we have 12 participants, they will give us all a free set of machined FCT knobs!! This is a $99 value, and will also come with the free shipping. Awesome!!! Let's do this...

[super01]

Did I mention, for the group buy, shipping is included to the lower 48 states? Well it is!! That's $580 TOTAL delivered!! (Outside of the lower 48 states, you will have to pay shipping.)