Announcement

Collapse
No announcement yet.

Please HELP! 04 air 210 won't crank been at shop for a month

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Sorry been working crazy hours so haven't had a chance to reply but the kill switch I bypassed that on the lake and they swapped with a new just to be sure at the shop didn't change anything, when I pulled a plug I held it to the block, but I'm not sure how the shop was doing it, boat is located just outside of wake Forrest in North Carolina but soon as I'm off call I guess I'm gonna run it to white lake and see if they can figure it out cause the shop its at still hasn't figured anything out and there really not trying to any more I feel like

    Comment


    • #17
      I don't understand the comment above. Did you pull a plug and hold to block and look for spark? And was there spark?

      Comment


      • #18
        Yes I pulled a plug and yes there was spark

        Comment


        • #19
          Next thing is to verify fuel pressure.

          Comment


          • #20
            60psi

            Comment


            • #21
              You tested yourself and got that reading? Or they told you this? Did you verify injectors are firing? Did you verify throttle body is opening to allow air?

              https://www.youtube.com/watch?v=tA_E6X4ISgQ&vl=en
              https://www.youtube.com/watch?v=UrqyrI5aNl0
              https://www.amazon.com/OTC-3631-Heav...tor+test+probe
              https://www.amazon.com/Waekon-76462-...tor+test+probe

              As you know you need, air fuel, and spark...If you can just verify which one is not working you will be down to 1/3 of the possible issues...

              Comment


              • #22
                That is what they told me it had on the fuel rails to the injectors. I did check to make sure throttle body was opening. I held a screw driver to an injector as the motor was turning over and I did not feel it clicking so I feel they are not working they said the only injector test they could do from the computer is if it was running which I feel like there is a way maybe they just don't know how to operate there computer or don't have the right computer

                Comment


                • #23
                  Sounds like it is time to either work on yourself or change shops.

                  Comment


                  • #24
                    Gonna try to get it to white lake next weekend good lil ride but there a dealer so they should be able to figure out if not a trade in value

                    Comment


                    • #25
                      Look up a set of noid lights, they should be cheap. You unplug the fuel injector and plug the noid light into the harness. Then crank the engine over. If it lights up injector is at least getting the signal to spray fuel. Check each injector one at a time, and good luck.

                      Comment


                      • #26
                        I didn't read through every response, but the first two items I would check... the emergency kill switch (the tether), and the neutral safety switch.

                        Comment


                        • #27
                          Originally posted by scottb7 View Post
                          You tested yourself and got that reading? Or they told you this? Did you verify injectors are firing? Did you verify throttle body is opening to allow air?

                          https://www.youtube.com/watch?v=tA_E6X4ISgQ&vl=en
                          https://www.youtube.com/watch?v=UrqyrI5aNl0
                          https://www.amazon.com/OTC-3631-Heav...tor+test+probe
                          https://www.amazon.com/Waekon-76462-...tor+test+probe

                          As you know you need, air fuel, and spark...If you can just verify which one is not working you will be down to 1/3 of the possible issues...
                          Sort of... you also need the correct timing... Which still sounds suspect to me.
                          2011 Sport 200V
                          1981 Anniversary SN
                          Sold - 2000 SAN

                          Comment


                          • #28
                            I am confused by above as the operating manual shows ignition timing controlled by ecm, and not adjustable. manual.pdf

                            Noid light looks like another good option for making sure ecm is pushing signal for fuel...
                            Attached Files
                            Last edited by scottb7; 1 week ago.

                            Comment

                            Working...
                            X