Impeller replacement

[95skinautique]

I have a 351 ford engine and i need help locating the impeller housing. I believe it is in the bottom right pulley, but i can be mistaken. And also best way to remove the impeller.

[Nautiquehunter]

Thats it . Two 1/2'' mounting bolts remove the complete unit . MARK the two halves of the housing then remove the three 7/16 bolts holding the two haves together. NOTE the pump assb can be installed upside down if that occurs it will not pump water . Either mark it before you remove it or remember the two hoses are on the engine side

[bhectus]

That should be a simple 15 minute job. May take you a little longer on your first go-around. Man do I miss how easy it is to do an impeller replacement on a GT40. My Apex is a royal PITA!!

[95skinautique]

Thanks and how do I tell which impeller I have or is there just a standard??

[bhectus]

here's the one you need:
http://www.nautiqueparts.com/sherwoodimpellerkit.aspx

[95skinautique]

Hey guys I just thought that I would keep my business local and them order the impeller for my sheerwood pump. It came in today so I had my brother go and pick it up and he told me that is an emp replacement for the sheerwood. Has any one heard of them?? Are they worth getting??