Nautique Releases G23 Paragon

[core-rider]

Gents I have a perfectly analogous scenario to compare. I ordered a 2020 F250 (the new 6.7L has 475HP/1050Tq and a 10 speed transmission). Imagine how ticked I'd have been if I ordered a 2020 (early as I did) and it came with the 2019 6.7L that has 450HP/935tq and a 6 speed transmission, both boats in the same model year, same MSRP, then Ford changed to the new engine and trans 4 months later. No bueno....

Dude I’ve nothing in this and I’m aggravated/annoyed at it! It’s not like this engine was just something PCM all a sudden decided to build... they’ve had this on a design team for some time now I bet.


Sent from my iPhone using Tapatalk

[RDT-G23]

Gents I have a perfectly analogous scenario to compare. I ordered a 2020 F250 (the new 6.7L has 475HP/1050Tq and a 10 speed transmission). Imagine how ticked I'd have been if I ordered a 2020 (early as I did) and it came with the 2019 6.7L that has 450HP/935tq and a 6 speed transmission, both trucks in the same model year, same MSRP, then Ford changed to the new engine and trans 4 months later. No bueno....

[NautiqueJeff]

MSRP does not appear to have changed, according to the website.

[GMLIII]

I wish you luck . Hope you can upgrade to ZZ8 engine

[core-rider]

Man I’d be all over my dealer and Nautique CS!!! These 550 boats will have a similar stigma to the early Gs without the 2:1 IMHO.

I wonder if MSRP went up as a result of the change... if not I don’t see any reason why boats that are one a certain stage of the build or not even started yet can’t get the change to the ZZ8. Even if there’s a cost difference Nautique should do something for its customers that bit the bullet early on the ordering process.

Even dealers that ordered boats without a sale just to get one for boat show season should be unhappy! They now have a boat that will be even harder to sell without taking a big hit.


Sent from my iPhone using Tapatalk

[RDT-G23]

This has a very bad look to it.

Da-n sure does. My boat is still deck and hull (not put together). This can be stopped. It is one thing to change the engine and gear box in the 2021s, but to do this 4 months after intro...

[Interjon]

This has a very bad look to it.

[RDT-G23]

So not to stir the pot, but I guess I am... how do you early buyers just taking delivery or about to feel about Jeff's new info that the P23 is no longer available with the 550 and the ZZ8 is now standard? I would not be a happy buyer if I were in those shoes!

I'm not pleased, and have already called my dealer-and left a message.

[NautiqueJeff]

The 550 engine is no longer an option on the Paragons!

You can't order a 550 on the Paragon anymore.

The only engine available is the new ZZ8.

And I believe the gear ratio has changed, too.

100% closed cooling is nice.

[core-rider]

So not to stir the pot, but I guess I am... how do you early buyers just taking delivery or about to feel about Jeff's new info that the P23 is no longer available with the 550 and the ZZ8 is now standard? I would not be a happy buyer if I were in those shoes!

[RDT-G23]

This helps. Mine sprayed last Thursday or Friday. If I add a month, then I'm at 2/28. (I'm likely a little sooner since I'm in Texas-closer to Orlando) (I know shipping has to do with having a full load to a geographic area or dealer.

[SteeleWake]

What Is being said -the total production days are for the Paragon?

Mine was three weeks from start to shipped. Then one week later in California...

[MG94]

Getting closer


Sent from my iPhone using Tapatalk

[MG94]

Sent from my iPhone using Tapatalk

[RDT-G23]

What Is being said -the total production days are for the Paragon?