Retractable Transom Pylon - Group Buy

[ziepfenj]

Need at least one more interested for Tachyon to make them...

[Jan288]

Bump

[Jan288]

I'm interested in one for a 2000 Super Sport.

[ziepfenj]

I did. How many are interested, and for what boat?

[8urchvy]

it's april...anyone contact him?

[Jan288]

He told me to get back with him in March

[ziepfenj]

I have been in contact with him over the past few months. I'd really like one for my 220.

[Jan288]

If anyone is interested in the retractable pylons, email Rick @ tachyonmotorsports.com. He indicated to me he may offer them again sometime this spring if there was enough interest.

[Jan288]

Tachyon is offering another group buy on the retractable pylon for Super Air Nautiques! This group buy will be open for orders from now until April 16th.


$580.00 gets you the complete retractable pylon system, which requires a simple 30 minute bolt-in installation. FREE SHIPPING (within the lower 48 states). International shipping available for an extra charge.

$140.00 additional gets you the barefoot boom mount, with quick-release "t-pin" connector. This mount allows you to connect your boom mount to your pylon in seconds - WITHOUT TOOLS!

As these pylons are made to order, all orders must be pre-paid (in full) by April 16th. We accept Paypal (send to sales@tachyonmotorsports.com), Visa, Mastercard, and Discover...and of course, cash or check. For Paypal users - be sure to include your forum name AND your real name in the notes section - as well as a phone number.

This may be the last time these pylons are offered, this is not a normally stocked item!

We need to get at least 3 orders to make this group buy a "go"

NOTE: There are three critical dimensions for the pylon - and a selection of the trim ring style that will be required before we start manufacturing. The dimensions allow the pylon to be made to the proper length for your Correct Craft, as there is variation between boats that does not allow us to make all parts the same. We will send out a print to each person on the Group Buy to collect these dimensions.


Here is a link to the previous group buy - see what others have to say about this unit!: http://www.planetnautique.com/vb3/sh...ylon-Group-Buy

The video below shows the prototype unit, please see the photos below for the finished product (black-anodized with dimpled pylon tip)




It is available for the following boats:
Super Sport Nautiques all years
210 SAN all years
220 SAN all years
Others models upon request (additional charges may apply)

Specifications:
Black Anodized 6061 Aluminum (machined from billet)
Stainless steel hardware
Trim Ring (2nd generation) fits better than previous versions
Installs in about 30 minutes (bolt-in, using factory mounting points)
Provides easy 'tool-less' mounting of a barefoot boom with optional attachment

Call 651-491-4638 or email rick@tachyonmotorsports.com for more information.

Pylon in extended and retracted position below, plus a photo of the final product as it sits in the boat:
http://www.planetnautique.com/vb3/attachment.php?attachmentid=19751&d=1351826960&quo t;][/URL]http://www.planetnautique.com/vb3/attachment.php?attachmentid=19752&d=1351827684&quo t;][/URL]http://www.planetnautique.com/vb3/attachment.php?attachmentid=19753&d=1351827721&quo t;][/URL]

Optional barefoot boom mount shown below:
http://www.planetnautique.com/vb3/attachment.php?attachmentid=19755&d=1351827802&quo t;][/URL]http://www.planetnautique.com/vb3/attachment.php?attachmentid=19756&d=1351828171&quo t;][/URL]

Load tested (yes, that was a chest high boom - and the pylon performed flawlessly afterwards)
http://www.planetnautique.com/vb3/attachment.php?attachmentid=19757&d=1351828240&quo t;][/URL]http://www.planetnautique.com/vb3/attachment.php?attachmentid=19758&d=1351828262&quo t;][/URL]


Crafted with pride in Minnesota
http://www.planetnautique.com/vb3/attachment.php?attachmentid=19759&d=1351828323&quo t;][/URL]
PLEASE LET ME KNOW IF YOU ARE INTERESTED!

Anymore group buys this year?

[CUE99T]

hey guys, I chatted before about this, I'm interested again, and wondered if you could also get me a boom to go with it? What do you reckon full cost could be? I'm in the UK and would need postage to G83 8JB (Scotland) post code?

Sorry if I missed the deadline date but I havent been on for a while.

cheers Paul

[Alpine331]

Do you know if this will work on a sv211?

[Spencermo]

Tachyon is offering another group buy on the retractable pylon for Super Air Nautiques! This group buy will be open for orders from now until April 16th.


$580.00 gets you the complete retractable pylon system, which requires a simple 30 minute bolt-in installation. FREE SHIPPING (within the lower 48 states). International shipping available for an extra charge.

$140.00 additional gets you the barefoot boom mount, with quick-release "t-pin" connector. This mount allows you to connect your boom mount to your pylon in seconds - WITHOUT TOOLS!

As these pylons are made to order, all orders must be pre-paid (in full) by April 16th. We accept Paypal (send to sales@tachyonmotorsports.com), Visa, Mastercard, and Discover...and of course, cash or check. For Paypal users - be sure to include your forum name AND your real name in the notes section - as well as a phone number.

This may be the last time these pylons are offered, this is not a normally stocked item!

We need to get at least 3 orders to make this group buy a "go"

NOTE: There are three critical dimensions for the pylon - and a selection of the trim ring style that will be required before we start manufacturing. The dimensions allow the pylon to be made to the proper length for your Correct Craft, as there is variation between boats that does not allow us to make all parts the same. We will send out a print to each person on the Group Buy to collect these dimensions.


Here is a link to the previous group buy - see what others have to say about this unit!: http://www.planetnautique.com/vb3/sh...ylon-Group-Buy

The video below shows the prototype unit, please see the photos below for the finished product (black-anodized with dimpled pylon tip)




It is available for the following boats:
Super Sport Nautiques all years
210 SAN all years
220 SAN all years
Others models upon request (additional charges may apply)

Specifications:
Black Anodized 6061 Aluminum (machined from billet)
Stainless steel hardware
Trim Ring (2nd generation) fits better than previous versions
Installs in about 30 minutes (bolt-in, using factory mounting points)
Provides easy 'tool-less' mounting of a barefoot boom with optional attachment

Call 651-491-4638 or email rick@tachyonmotorsports.com for more information.

Pylon in extended and retracted position below, plus a photo of the final product as it sits in the boat:


Optional barefoot boom mount shown below:


Load tested (yes, that was a chest high boom - and the pylon performed flawlessly afterwards)



Crafted with pride in Minnesota

PLEASE LET ME KNOW IF YOU ARE INTERESTED!

[Spencermo]

hey Guys.....I am getting together another group buy for these. We need at least 3 orders to get the better rate. Anyone out there still interested in getting some? If so let me know!

[210 Hopeful]

I have a 2005 210. I would like to get one for my boat as well.

[bsnively]

I just sent an email as well, but I'm in if it's not to late (or somebody backs out). Mine is for a 2001 SAN.

Thanks,
Ben