Welcome to PLANETNAUTIQUE! We're glad you're here. In order to participate in our discussions, you must register for a free account. With over 25,000 registered members already, we would love to have you as a member too! Click here to access our Registration Page. Registration is quick and easy, and we keep any information you give us completely confidential. Once registered, you may sign in using the drop-down Login or Sign Up window at the upper right corner of the site.
I've only had it out 2 days but during daytime it's fine! I did it for looks mostly and I don't mind sticking my head above the windshield when the sun goes down! lol
So far I'm loving it
I did it custom for my 220. It is easy. Just take the right measures, get a very hard rigid board/plastic, foam, vinyl and staples. Remember to remove some foam from the down part in order to make it thinner and let it fit in the edge of the bow filler cushion.[ATTACH=CONFIG]28363[/ATTACH]
How much would you say it cost to make the seat back?
I recycled the board,and the foam. The vinyl is 20$ per yard. So my cost was negligible. But if you give them drawings. They should charge you between 50-100$ for it
ViSor - Fine looking boat! congrats, you did a great job! Over the winter, I also had Seadek installed, plumbed in fat sacs, removed old decal and had all gel coat touched up along with a fresh decal. Last weekend was the first weekend out and had a blast! We are heading out first thing tomorrow morning and are all excited to finally be on the water.
ViSor - Fine looking boat! congrats, you did a great job! Over the winter, I also had Seadek installed, plumbed in fat sacs, removed old decal and had all gel coat touched up along with a fresh decal. Last weekend was the first weekend out and had a blast! We are heading out first thing tomorrow morning and are all excited to finally be on the water.
Sounds like you gave a nice updated look to your boat, you should post pics to update your thread! Have a good season!
Where did you get the seadeck from? That seams like an awesome mod. Our boats grey - so i'm curious to know if it comes in other colors than beige/brown. I'm sick of our kids eating chips on the boat and grinding it wet into the carpets :S
How did you wire in the light bar? Did you splice into the cable from the stock tower light or run a new wire through the tubes?
Did you piggy back your bow bag to your belly tank? We have the same boat with an arrow sac - (not plumbed in) and i'm curious to know how it drains.
Comment