I have a 2020 G23 and was attempting to Fog the engine. I could not get the spark plug boot off of cylinder #1 due to the raw water system being in the way. Does anyone have tips on how to access this spark plug?
X
-
Did you try by hand only or do you have a boot puller?Originally posted by PTFlyer View PostI have a 2020 G23 and was attempting to Fog the engine. I could not get the spark plug boot off of cylinder #1 due to the raw water system being in the way. Does anyone have tips on how to access this spark plug?
-
When I changed the plugs on my 2016 G23, I bought a few different types of boot pullers on Amazon. I ended up needing 2-3 different ones to get the job done. I just kept the ones I used and returned the ones I didn't. These were the ones I kept.Originally posted by PTFlyer View Post
I only attempted by hand. Boot puller will be the next step, any suggestion on a boot puller? The angle to the plug is very tight
https://www.amazon.com/dp/B019Z09JHU...d_asin_title_3
https://www.amazon.com/dp/B0CCNF2DG1...d_asin_title_6
This one was a good idea but absolute garbage so I returned it. Avoid
https://www.amazon.com/dp/B0954H1PLL...d_asin_title_4
👍 1Comment








Comment