C&S Marine Partial Vinyl Replacement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MTNauti
    • Mar 2025
    • 6

    • Bozeman Montana

    • 2007 SANTE 220

    #1

    C&S Marine Partial Vinyl Replacement

    Wondering if anyone has used C&S Marine for only a partial vinyl replacement instead of full replacement. If so, how did it turn out and how closely were they able to match your existing vinyl. The quote I received to do the whole boat is more than I'd care to spend and I really only need to replace several cushions. But if the color match was noticeably different, it would probably drive me crazy.
  • MN Ryan
    1,000 Post Club Member
    • Aug 2020
    • 1368

    • Maple Grove, MN

    • 2007 SV-211 TE

    #2
    I ordered skins for 4 cushions this fall and installed them myself over the winter. I sent them my hull ID and they sent me a few vinyl samples to color match. I will say that they're very close. Considering most of my vinyl is 18 years old, I'm quite pleased with the match. They're very responsive and helpful, too.

    Comment

    • MN Ryan
      1,000 Post Club Member
      • Aug 2020
      • 1368

      • Maple Grove, MN

      • 2007 SV-211 TE

      #3
      I'll try to remember to grab a pic for you this weekend.

      Comment

      • MTNauti
        • Mar 2025
        • 6

        • Bozeman Montana

        • 2007 SANTE 220

        #4
        Thanks, MN Ryan. This is helpful.

        Comment

        • migs
          Senior Member of PLANETNAUTIQUE
          • Aug 2008
          • 704

          • San Mateo, CA

          • SAN 210 TE

          #5
          ive used them in 3 separate occasions. Great customer service and the skins are almost identical. As Ryan mentioned, the original skins on my boat are 17 years old, so there is some fading which i think is the reason for not being exactly perfect color match. But its really quite close. Im ordering from them again after this season... I wouldnt order skins from anyone else....Just keep in mind its typically a 3 month turnaround time from ordering to receiving the skin, so plan ahead.
          Migs

          G21 - En route
          SAN 210 TE (Finally)
          06 Sky Supreme V220(previous)
          05 Sanger V210(previous)
          01 MC X1(previous)
          99 Air Warrior(previous)

          Comment

          • SilentSeven
            1,000 Post Club Member
            • Feb 2014
            • 2039

            • Bellevue WA

            • 2004 Nautique 206

            #6
            Echoing what MN Ryan and migs said - C&S are great. I've done multiple orders to replace specific bits in two different boats. Where there is an issue, they are quick to respond.

            If you do want to order some skins, I would suggest getting moving as there can be a pretty decent lead time.
            2004 206 Air Nautique Limited - Black with Vapor Blue (family style)
            1997 Masters Edition Nautique - Zephyr Green - gone (amazing ski wake)
            1982 Mastercraft Powerslot - gone (a primitive but wonderful beast)
            Bellevue WA

            Comment

            • bturner
              1,000 Post Club Member
              • Jun 2019
              • 1685

              • MI

              • 2016 200 Sport Nautique

              #7
              One of my considerations for choosing an MC or a Nautique was availability of getting replacement interior skins as I tend to keep my boats for a while. No one is providing this service for any of the other major brands to my knowledge. Having the service went a long way in having the Nautique on the lift today.

              Comment

              Working...