2013 Nautique G23 clear error codes ballast tanks port and starboard

[GrantGrabe]

We need some help on what to try

[GrantGrabe]

[charlesml3]

Looks to me like the Port and Starboard pumps are drawing too much current and tripping the LINC. Any chance the wrong impellers were installed?

[Infinity]

Check all your wiring connections for corrosion too, could easily be the case in a 2013 even if you always dry out the boat. My 2014 had some corrosion at the speaker connections for the amps recently and I am anal about putting fans on the boat after every outing.

[cedarcreek216]

I had the same error in our 2013 210 and the impeller was just hung. I pulled them all out and made sure they were installed with no bent or hung up blades and it cleared the codes.


Sent from my iPhone using Tapatalk