No signal to forward

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SierraWave
    • Sep 2016
    • 59

    • Imperial Lakes and Dollar Point

    • 2015 200 2016 G23
    #1

    No signal to forward

    I have a 15 200 with the electronic shift trans. It does not go into gear when the throttle is moved forward only the revs go up. I swapped the plugs on the trans and put the throttle in reverse and the boat went forward. The problem is intermittent. Any one else have this problem?


    Sent from my iPhone using PLT Nautique
    Tags: None
    • distinguishedmotorsports
      Senior Member of PLANETNAUTIQUE
      • Aug 2016
      • 485

      • Austin, TX

      • current: 2006 Cobalt 343 with twin 525hp Mercs former boats:'99 Air, '12 210, '10 230, '07 236, '06 211, '05 220, '06 220, '06 210
      #2
      warranty, too new not too, IMO

      haven't heard of that happening either, granted, there are not a ton of 200s on the board either.

        Comment

        • Nautiquehunter
          1,000 Post Club Member
          • Jun 2008
          • 2096

          • Flowery Branch GA Lake Lanier

          • 2008 210 SANTE 67 Correct Craft Mustang 63 Correct Craft American Skier 2016 200 open bow
          #3
          Still under warranty?

            Comment

            • AdamJBarn
              • Feb 2016
              • 51

              • Fishers, IN

              • 2002 Super Air Nautique 210
              #4
              Is the 200 not under warranty?


              Sent from my iPhone using PLT Nautique

                Comment

                • Schafer
                  • Apr 2025
                  • 3

                  • Lacombe, Alberta

                  • 2016 200 6.2 L
                  #5
                  Originally posted by SierraWave View Post
                  I have a 15 200 with the electronic shift trans. It does not go into gear when the throttle is moved forward only the revs go up. I swapped the plugs on the trans and put the throttle in reverse and the boat went forward. The problem is intermittent. Any one else have this problem?


                  Sent from my iPhone using PLT Nautique
                  im experiencing this exact thing.
                  did you get it fixed? Throttle base assembly?

                    Comment

                    • jpwhit
                      Senior Member of PLANETNAUTIQUE
                      • Aug 2016
                      • 635

                      • Cary, NC

                      • 1998 Ski Nautique 2012 Nautique 200 2014 MasterCraft X25 . 2019 MasterCraft ProStar
                      #6
                      These symptoms are typically caused by a failing Throttle Base Assembly. They are terribly unreliable. I know of folks that are on their third one.....

                        Comment

                        • Schafer
                          • Apr 2025
                          • 3

                          • Lacombe, Alberta

                          • 2016 200 6.2 L
                          #7
                          Quote removed by Admin for not following the Guidelines for Quoting Previous Posts in a Thread.

                          This will now be my 3rd one too.

                          anyone had any luck trying to repair the base assembly?

                            Comment

                            • lilet
                              • Apr 2011
                              • 40

                              • greece

                              • Nautique 200 CB Nautique 196
                              #8
                              Originally posted by Schafer View Post

                              im experiencing this exact thing.
                              did you get it fixed? Throttle base assembly?
                              im experiencing the same thing. have you sorted it? i used a working throttle from a gs20 and still doesnt work. did you check the two plugs that go on the transmission? one of them doesnt have voltage on mine but dont know where the problem is.

                                Comment

                                Previous template Next
                                Working...