Announcement

Collapse
No announcement yet.

1995 super sport restoration

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chris Parsons
    replied
    In an effort to better match the outside of the boat in case it doesn't get wrapped, I've updated the colors. I've also decided to use two textures throughout the boat. Something that looks like leather and one that is smooth

    Sent from my SM-G986U using Tapatalk

    Leave a comment:


  • Chris Parsons
    replied
    Massive set backs on upholstery. After dealing with it for a year I finally asked for a refund and will be looking for someone else.

    That said the tower renovation went quite well. New speaker plates welded. Everything coated with the haze gray raptor finish. Excites to see this back on my boat.

    Sent from my SM-G986U using Tapatalk

    Leave a comment:


  • Chris Parsons
    replied
    Seadek got cut. Here is the final design.

    Sent from my SM-G986U using Tapatalk

    Leave a comment:


  • Chris Parsons
    replied
    It's plastic and probably made with a vacuum former. That said I bought it from nautiqueparts.com as it's on a mid 2000s nautique.

    Sent from my SM-G986U using Tapatalk

    Leave a comment:


  • jhiestand
    replied
    So what are those speaker pockets made of and how did you fabricate them?

    Leave a comment:


  • Chris Parsons
    replied
    On my new custom speaker pockets I'll be adding a acrylic plastic etched "nautique" emblem that is rgb lit. If you zoom in you can see it. Also went ahead and cut a hole for the other speaker. Used a rotary saw. The cup holder holes are too small for the rgb cup holders so I used a dremmel to widen the holes a little. Everything test fit nicely.

    Sent from my SM-G986U using Tapatalk

    Leave a comment:


  • Chris Parsons
    replied
    Jb welded all of thr cracked holes that secure the dash. I'll drill them out after it cures. In hind sight some sort of mesh tape might have helped with strength.

    Sent from my SM-G986U using Tapatalk

    Leave a comment:


  • Chris Parsons
    replied
    Yanked the tower for a paint touch up.thinking I'll go haze gray on all of it. Also I'm doing the costal raptor finish which is like a bed liner type material. It should still look nice and will stay nice longer. Age well.

    Sent from my SM-G986U using Tapatalk

    Leave a comment:


  • CincinnatiCC
    replied
    Looking good!

    Leave a comment:


  • Chris Parsons
    replied
    Refresh of the dash.

    I'll still be working on a cleaner look for the right switches.

    Sent from my SM-G986U using Tapatalk

    Leave a comment:


  • Chris Parsons
    replied
    Finalizing seadek patter/design.

    Sent from my SM-G986U using Tapatalk

    Leave a comment:


  • Chris Parsons
    replied
    Before...

    Sent from my SM-G986U using Tapatalk

    Leave a comment:


  • Chris Parsons
    replied
    Switch plate

    Sent from my SM-G986U using Tapatalk

    Leave a comment:


  • Chris Parsons
    replied
    Working on installing the ballast this week. Pulled all the wire, wired up the pumps, and installed the switches.

    All that is left is to run the hose.

    Also did a new dash plate.

    The ballast switch plate is a temporary fix. Open to suggestions. Would Like it to be more polished/finished. [/IMG]

    Sent from my SM-G986U using Tapatalk


    Leave a comment:


  • Chris Parsons
    replied
    New rub rail today. Black looks so good.

    Sent from my SM-G986U using Tapatalk

    Leave a comment:

Working...
X