1995 SUPER SPORT AMP INSTALL

[wake_fun]

I finally finished my stereo install. Here are the pics of the amps. I did it without using wood with glue or long metal staps bolted to the boat. All fasteners are stainless steel. I used 16 GA steel as my template for the amps.

[sperbet]

nice wake_fun, what are those things pushing??

[wake_fun]

Four JL XR650-CXi's in the stock location and one JL 10W7.

[Alan-S]

Don't know if you already have your JL 10W7 installed yet, But I have a a 2001 SAN and my 10W7 with the JL sealed enclosure fits in behind the Kick board of the drivers feet. It sounds awesome there too, I have it facing foreward and the bass just wraps up and around the bow seating. I have my amps mounted in the same place as you too. No one could ever know i have a 1600 watt system unless they hit the start button. Super stealth.

[Rock_Toy]

How did you connect those nutcerts to your hull? Epoxy or are they drilled in? I LOVE the way you did thi and am thinking about doing the exact same thing to mine. My stereo kicks but the wiring and setup is crappy.

[Rock_Toy]

Alan-S, do you have pics of your sub? My buddy is tryin to do the same and is struggling a little....

[wake_fun]

Epoxy


How did you connect those nutcerts to your hull? Epoxy or are they drilled in? I LOVE the way you did thi and am thinking about doing the exact same thing to mine. My stereo kicks but the wiring and setup is crappy.

[Rock_Toy]

Wake_fun, where in CA are you? I would love to check out your boat....sounds like mine except with some upgrades that I have been thinking about making.

[mfloski]

where did you get the nutserts from?

[jonbassham]

Aonybody know where to get those mounting pieces?

[Labatt911]

Look at any hardware store Home Depot, Lowes, ect. I have seen them there. Look first in the specialty fasteners section if not there try the cabinet hardware section.

[jonbassham]

thanks!

[wake_fun]

To everyone that has asked.

www.clickbond.com

Glass/Epoxy Base, Stainless standoff

[wake_fun]

Update;
They have stood up to the test of many hours of boating. No failure, everything is perfect!!!!!!

[MHayes]

Looks awesome and love the mounting approach you took on the amps. I tried to get onto the clickbond site, but they want you to register...blah, blah, blah. This looks like the manufacturers site, and I was just trying to find a place that sells them. I looked in Home Depot last night, but had no luck. Anyone know where I can find these standoffs? Thanks!

[leesnuts]

I just bought a bunch of the fasteners, they were $12/each plus shipping. Let me know if anyone is interested in any, I will have some extra's. email azclubcentral@hotmail.com

[coloradonautique]

Did you buy them from clickbond or somewhere else? Link? When the boat comes out of storage, I will be looking to do a similar mounting setup for my amp. Thanks.

-Lorin

[wake_fun]

I ordered from Click Bond directly.
www.clickbond.com

[verbier123]

I also used the clickbond fasteners. I made an amp rack out of plywood coated with fiberglass resin. Placed it in the same place as wakefun. I got the clickbond parts from:

http://www.theflightshop.com/

They ship fast, but communication is poor. Still, I recomend them, the prices seemed good.

[TravisFling]

You can also get these at Columbus Fastener Corporation

www.colfast.com

[tazz3069]

i know this post is very old. I do really like the standoffs. i think when I do do my stereo upgrade, i will be using them. i'm glad i read this

[wcherashore]

I see how the fasteners are mounted to the hull and then the finished result with them thru the carpet... I assume you peeled the carpet back and drilled holes in the carpet?

[wake_fun]

I see how the fasteners are mounted to the hull and then the finished result with them thru the carpet... I assume you peeled the carpet back and drilled holes in the carpet?

Sorry I never saw your question:(.........I just cut a little hole in the carpet and the studs stick through.