Fusion MS-BT100 Bluetooth

[Davis0098]

Fusion bt100 adapter and the head unit is Clarion CMD8

[MN Ryan]

OK, it does not look like the CMD8 has RCA inputs, so you're going to need an RCA to 3.5 mm stereo adapter, which are readily available and cheap (Amazon: https://a.co/d/2RJz57T). Once you get that, attach the RCA plugs from the BT100 to the adapter and plug it into the 3.5 mm AUX port on the CMD8.
On the power side, connect the black wire from the BT100 in with the black wire (ground) coming from the wiring harness on the back of the CMD8. Connect the red wire from the BT100 to the blue/white wire (amp turn on) coming from the wiring harness on the back of the CMD8.
That should do it.
Fusion MS-BT100: https://static.garmin.com/pumac/BT10...ions_EN-US.pdf
Clarion CMD8: https://www.westmarine.com/on/demand...nersManual.pdf

[MN Ryan]

Davis0098 Did you get this figured out?

[MN Ryan]

Good talk.

[Davis0098]

Hey sorry about that! I thought I was signed up for alerts. No, I haven't figured it out. I purchased the Clarion M608 in hopes of it being plug and play, but it literally arrives today so if I could figure out this Fusion BT100 bluetooth I would return the head unit. I looked at the owners manual and couldnt figure out which wires I would use for the Fusion - see picture - can you help me figure that out?

[MN Ryan]

Can you try to post the pic a different way? I don't see anything.