Tweet
The link below describes installation of a printed circuit board that drives the Faria gateway speedometer signal. So if you have a gateway that has pitot tubes either plugged or you want to plug them (a really good idea) this is for you. Inputs can be: Paddlewheel if you have that fitted, Garmin GPS signal if you have upgraded to the StarGazer Perfect Pass, or a stand along GPS puck that I will supply. This is really intended as a DIY kit but I might consider modifying a few gateways or maybe getting some service centers to modify them for me.
Feel free to PM me for more details. https://www.youtube.com/watch?v=iYaORefJk7I
Feel free to PM me for more details. https://www.youtube.com/watch?v=iYaORefJk7I