Hello all. I am a first time Natique owner with a 2004 SV211 (had an older mastercraft a few years ago) and found a brass plug in a cup holder which sent me on a search for where it went. I subsequently contacted the seller who told me it was an "extra" that he had bought last year. However during my search I found a threaded hole that seems like it should have something in it and I was hoping for your expertise (no local dealers with expertise near me). When I ran it there was no leaking and it ran great but it does seem like something was in there.
Hopefully you can see from the pictures, but it is on the starboard side of the engine and behind and above the oil pressure sending unit and the T that goes in the block there. Thanks for your help and I hope this isn't going to cause me problems with my new (old) boat!
Hopefully you can see from the pictures, but it is on the starboard side of the engine and behind and above the oil pressure sending unit and the T that goes in the block there. Thanks for your help and I hope this isn't going to cause me problems with my new (old) boat!
Attached Files
Comment