ski assist not working after new linc screen on gs20

[ngs20]

dealer installed a new linc screen and did the latest software update but now "ski assist" does not work". the ncrs does work in surf mode so i dont think it is the cylinder itself- i think it is software- any ideas?

[NautiqueJeff]

Probably a dealer setting in the LINC somewhere. Also, they may have possibly put the software for a different model (that doesn't use Ski Assist) on the LINC.

[ngs20]

thank you- they also put updated sensors in my ballast pumps. now they fill properly but when emptying they run dry for at least a minute- before the new sensors they would just fill and then run out the overflow until i stopped them. also my stereo does not work now just says "stereo booting"- they claim they didnt break it but it was working when it went into their shop

[ngs20]

linc version 20200218.2.9.10482/g6pan my2017. this is the version they put on

[NautiqueJeff]

Not sure if that is the latest or not, but seems like there should be a newer version than 2020.

[ngs20]

according to the factory they put the wrong linc so now they have to put a different one in- had it for almost 2 months before