Nautique Garmin Surf Select Pairing

[SmokieRiver]

Just brought home my new G23 today and was trying figure out of to pair my Garmin Fenix 6 with the Surf Select app to the boat? Checked the manual and google and can’t find anything. Can anyone help?

Attached is a pic of the new boat for attention.

[GMLIII]

Just brought home my new G23 today and was trying figure out of to pair my Garmin Fenix 6 with the Surf Select app to the boat? Checked the manual and google and can’t find anything. Can anyone help?

Attached is a pic of the new boat for attention.

Did you purchase the Surf Select option on your new G23?

[SmokieRiver]

I did not order the surf switch, because I had the watch and was planning on using the app. I have a feeling you are going to tell me I needed to order the switch for the watch app to work. Is it an easy after build add?

[boomersooner]

Yep. Surf select has the module to connect the hand held remote and the watch. I just bought the watch last week since the hand held only switches sides. With the app, the watch connects automatically once you go into the app on the watch.

[NautiqueJeff]

Yes. The option is called Surf Select with The Surf Switch. It is one choice. You may not use the Surf Switch, but you need the Surf Select module installed.

You can get it from any dealer and install it yourself pretty easily (or have them do it).

MSRP on that option was $942 if ordered with the boat. Not sure what the price would be to add it on later.

[SmokieRiver]

OK - Thank you for the help.

[Rhodes2nowhere]

I just tested mine out this weekend and it auto connects. Has anyone figured out the max distance and do you have to have your phone onboard?


Sent from my iPhone using Tapatalk

[mulde35d]

No phone needed, Mine disconnects about 40 feet away. Not good enough range for wakeboarding, but just fine for surfing and hanging out.

[Rhodes2nowhere]

Thanks


Sent from my iPhone using Tapatalk

[tim_m22]

I didn't order the surf select option on my 2021 GS22, because I didn't want to pay the $900 option. I ordered the surf select module from Nautique Parts part number 200169 total price with tax and shipping was $390.84. The plug is in the starboard rear wiring harness. It is a 4pin Deutsch connector and believe it has SB written on it. You will just need 4 short stainless screws to mount it to the rear engine board (not the quick release panel). Then you just need to turn it on in the dealer settings with code 9191. Think it took about 3-4 days to come in also. Also I had to contact Nautique parts to put the order in as they don't have it on their website.

[SmokieRiver]

Awesome. Thank you for the information!!!

[GMLIII]

I didn't order the surf select option on my 2021 GS22, because I didn't want to pay the $900 option. I ordered the surf select module from Nautique Parts part number 200169 total price with tax and shipping was $390.84. The plug is in the starboard rear wiring harness. It is a 4pin Deutsch connector and believe it has SB written on it. You will just need 4 short stainless screws to mount it to the rear engine board (not the quick release panel). Then you just need to turn it on in the dealer settings with code 9191. Think it took about 3-4 days to come in also. Also I had to contact Nautique parts to put the order in as they don't have it on their website.

So at the end of the day on the top of the $390.00 hard cost in addition to your time and energy and back and forth with the dealer syncing the Linc system do you think you really saved any dollars ? I hope so but I’m struggling

[Johnny_Rock]

What does it do once it is paired?

[Rhodes2nowhere]

Side select, music volume, ballast transfer, NDA, ncrs, set speed


Sent from my iPhone using Tapatalk