06 211 ballast pump relocation to engine bay?

[theskunk]

Hey gang - I've got an 06 211 and the front/belly pump is in the *worst* possible location (ever... no really) and I'd like to move it to the engine bay - I've already got the wire, hose, and connectors to make it all work, however I'm currently missing the part about "where they mount it" - I know that the 07+ moved them, but I need some pictures of 'how' - Anybody with an 07+ care to share how to they mounted it so that I can get it moved?

Thanks!

[homer12]

I assume you have a reversible impeller pump...? I've heard of people mounting them to the ski pylon brace right inside the engine hatch. You should be able to search here and find ballast pump install locations. My aerator pumps in my SV211 on the belly tank are extremely easy to get to. Where did they mount yours?

[theskunk]

Yes - the Jabsco reversible - Mine is mounted ahead of the fuse box at the drivers foot-well. It involves a *lot* of contortion and friends drinking beer and pointing at you while laughing to get to it.... so I figure i'll move it while i've go the boat all dismantled for upgrades this year.

[mikenbike211]

Hey gang - I've got an 06 211 and the front/belly pump is in the *worst* possible location (ever... no really) and I'd like to move it to the engine bay - I've already got the wire, hose, and connectors to make it all work, however I'm currently missing the part about "where they mount it" - I know that the 07+ moved them, but I need some pictures of 'how' - Anybody with an 07+ care to share how to they mounted it so that I can get it moved?

Thanks!

I have an 08, it is just a think plate of aluminum mounted to the divider bar between engine hatch and starboard side locker lids... can send pics if needed.


Sent from my iPad using PLT Nautique

[Mlagrone]

Yes I have an 06 SANTE 220 and my 3 jabsco pumps (POS) are located on the pylon with aluminum flat stock. even there it is a pain in the aXX to get them out to replace them... ask me how i know this...