DTC 502 Roadspeed input loss of signal LincII 2013 230

[lance2skyhigh]

Just picked boat up from Dealer and had this code first run out on acceleration. Everything is working except the speedometer, which keeps the NSS from working also. Is anyone failure with the speed control system? I have a GPS location. The gps is showing a circulating blue ring which I do not remember seeing in the past?

[nohlan_4]

Just picked boat up from Dealer and had this code first run out on acceleration. Everything is working except the speedometer, which keeps the NSS from working also. Is anyone failure with the speed control system? I have a GPS location. The gps is showing a circulating blue ring which I do not remember seeing in the past?

Just went through the same thing on my G23. On the gps utilities page in the Linc screen do you show any gps satellites active? Mine ended up being a failed GPS antenna/puck. Replaced it and it was good to go.

[lance2skyhigh]

It does show gps satellites. Is the speed control only based on gps, or does it use water pressure also?

[nohlan_4]

It does show gps satellites. Is the speed control only based on gps, or does it use water pressure also?

So you actually show a latitude and longitude? On gps equipped boats yes the gps is the only signal. Could be a problem with the linc, have you tried running an update on it?

[toddo75]

I just got a new Nautique 210 and the same thing haoo Ned to me. How did you all resolve this issue? Thanks