Windshield bumper?????

[jslow68]

I just purchased a 2000 SAN. The walk through winshield I believe is missing a rubber bumper or stop. It has just a piece of plastic sticking out. Is this this right or am I missing somthing?
I have been searching on here and on parts websites and can't find anything. Any help would be appreciated.

[Chexi]

Call Whitelake (aka Nautiqueparts.com).

[jslow68]

I looked on their website and could not find anyhting. I'll give them a call.

[jslow68]

I called and they said they stopped making them.

[DealsGapCobra]

I would go to McMaster-Carr (mcmaster.com) and look for a substitute part.

Maybe someone can post a photo of what it should look like.

[jhiestand]

I have a 2001 and it just has a plastic "leg" that protrudes that contacts the glass when the walkthrough window is open. It doesn't have any rubber on the tip nor does it have a contact point on the window. Unfortunately I don't have a picture of it handy.

[mrbobolina]

If the windshield is Taylormade, you can go to Taylormade and buy the parts.

[cjreents]

I ran into the same problem when I had to replace my port side window and walk-through. I ordered these:
http://www.wholesalemarine.com/p/NAT...Door+Pads.html

There not as big as the look online...

- Chris