Hey Guys wanting to know what weight and speed setup you all are using for 2015 g23 i am currently running full ballast I have 2 850's plumbed in in the back I may fill up 1/4 to a 1/3 about 160lbs of led under front seats 80 under each side and we ride 11.6 NCRS on 5 and NSS 3 on regular side 0 on goofy any feedback appreciated
X
-
Tags: None
-
List the boat to the surf side by letting about 1/3 of the current weight out of the stock ballast tank. Will clean up nicely. I run 650’s in the back full and just use the stock tanks to adjust weight.
Sent from my iPhone using Tapatalk
-
Darn that is a lot of weight in the stern . I have a G23 2017 and run full ballast with NO extra weight in stern. Midship port and starboard 150 lbs lead each side, port observer seat 250 lbs lead , port bow 100lb lead , starboard bow 100. These late model G23s don’t do well with loading up the stern . Why? (because the NSS plates get submerged below the waveOriginally posted by chrisschweda View PostHey Guys wanting to know what weight and speed setup you all are using for 2015 g23 i am currently running full ballast I have 2 850's plumbed in in the back I may fill up 1/4 to a 1/3 about 160lbs of led under front seats 80 under each side and we ride 11.6 NCRS on 5 and NSS 3 on regular side 0 on goofy any feedback appreciated
hence screws up the wave big time). I run NSS at 0 and NCRS at 3 . MPH 11.4
Comment








Comment