2013 Nautique 210 transom grabrail

[jesam]

We had the new to us 210 out this weekend for the first time. Love the boat with only one small complaint. Everyone was griping about having no grabrail on the transom. This is the 210 model prior to the newest walk thru transom which features transom grabrails. To my knowledge there is no transom grabrail specific to the 2013 model 210 but does anyone know of another that will work? Just by looking at pics I don't think the newer version will work, looks to be different angles.

[Guntersville230]

Not sure the answer but the guys over at nautiqueparts.com know alot and are very helpful....wouldnt hurt to give them a call

Sent from my SM-G935V using PLANETNAUTIQUE mobile app

[ScooterMcgavin]

Are you saying it doesn't even have the grab rails off to the side mounted vertical? Have any pics of the back of your boat?

[jesam]

It has the side vertical grab rails, which are useless.

[jesam]

Follow up, if anyone cares, the 230s of the same vintage have horizontal rear transom grab rails, not the vertical side mount like on the 210. I have ordered the 230 grab rails. Hopefully they'll work. I will follow up when received.




230





210

[Beg4wake]

I would assume that those will work no problem! And I agree, the vertical mount grab handles are useless!

[ScooterMcgavin]

I am interested to see if they fit. Keep us posted and thank you

[deelan]

Your boat should be so slammed that you slide up on the swim platform like a seal :-)


Sent from my iPhone using Tapatalk

[jesam]

Ha! Integrated 650's and arrow front bag along with the Acme 1617 in route!

[lucky7t]

Your boat should be so slammed that you slide up on the swim platform like a seal :-)


Sent from my iPhone using Tapatalk

That is so true . Every time we anchor and swim I fill the tanks . It's so easy to slide up on the platform when the tanks are full

[pSchwade]

bawler...

[markj]

Once you get those horizontal grab bars mounted, I don't even see a reason for keeping the vertical grab bars unless you're going for that handicapped accessible, (ADA compliant) look.

[jesam]

Mark, agree, and it'd be an easy patch job. They look odd to start with........

[core-rider]

I'd almost say the grab rails between the 210 and 230 are the same part, just different mounting location. About the only good they do on the 210 is when the boat is on the trailer to help get up from the side. I agree the boat should sit deep enough in the water you can pull a Seaworld orca sliding maneuver onto the platform!

[Beg4wake]

Haha....Core-rider has a point....you probably could have just relocated the grab rails to the horizontal position and saved $$$!