I was reading the thread about the gass getting in the Vent when Surfing. It made me think of somthing,
I have a 02 air. When I fill my gas tank I notice that I have over flow spilling out the vent when I drive to the lake. So I did 3 things.
1. I installed a One way valve from the gas tank to the vent.
2. I never fill my tank completely
3. I always fill my boat with gas as close to the lake as possable so I dont have far to drive with a full tank
The problem is Im still get gas comming out the overflow, And it messes up my pinstripe tape because the gass comes out thevent and runs down the side of the boat. I have had to re-do it 3 times now.
I have a 02 air. When I fill my gas tank I notice that I have over flow spilling out the vent when I drive to the lake. So I did 3 things.
1. I installed a One way valve from the gas tank to the vent.
2. I never fill my tank completely
3. I always fill my boat with gas as close to the lake as possable so I dont have far to drive with a full tank
The problem is Im still get gas comming out the overflow, And it messes up my pinstripe tape because the gass comes out thevent and runs down the side of the boat. I have had to re-do it 3 times now.







I read one of the .PDF's on the site and it said that gas should have no effect on the stripe. Here's a link:
It may be a little while, but I'll let you guys know how it works.
Comment