New to me 226

[zswartley1214]

07 226 LE
ZR6 with 162 hrs

Lake test/ Purchase day



Home on our lake... (minus some decals)


First trip to Raystown!

[zswartley1214]

A few shots from the weekend.

[Nautique Fan]

Congrats. I really like the yellow. Looks great.

[zswartley1214]

First drone video for us. Hope you enjoy.

[ecoastkid]

Nice looking boat!

[MTRBTR]

White boats with yellow accents are awesome

[Nautique Fan]

Just a heads up. I have the same engine and this year I had the serpentine belt come off about 3 times. Finally I realized one of the bolts that holds the alternator had snapped. It took me 6 hours to get the busted bolt out of the engine block. I've got it all back together but I am going to make sure those 3 bolts are tight a couple of times a year.


Sent from my iPhone using PLT Nautique

[CarlitosAir]

looks great! i have the same boat, but with the red/black/white colors, and first thing i did was remove the decals. i like the lettering you added on there instead. Also the seadek looks great, did you do that yourself? if so where did you find it? i cant locate it anywhere.

thanks

[zswartley1214]

looks great! i have the same boat, but with the red/black/white colors, and first thing i did was remove the decals. i like the lettering you added on there instead. Also the seadek looks great, did you do that yourself? if so where did you find it? i cant locate it anywhere.

thanks

Thanks for the comments. Dealer in MD completed the sea deck for the original owner, but everything was done through Nautique. I know of one place here in PA that would do a diagram and laser cut it for you, but I would start with a Nautique shop and go from there. Good Luck!

[CarlitosAir]

Thanks for the comments. Dealer in MD completed the sea deck for the original owner, but everything was done through Nautique. I know of one place here in PA that would do a diagram and laser cut it for you, but I would start with a Nautique shop and go from there. Good Luck!

thank you! Did you happen to try surfing on it yet? What's your weighting and ballast set up if so? what about wave quality?

[zswartley1214]

thank you! Did you happen to try surfing on it yet? What's your weighting and ballast set up if so? what about wave quality?

Ordered 2 wedges for next season. No experience yet - stand by...

[CarlitosAir]

Ordered 2 wedges for next season. No experience yet - stand by...

cool! I'll share with you what I have so far, and maybe we can help each other find success
last week we were 4 people out, so 3 people on board and 1 surfer. Wedge placed on the starboard side rear, 750# fat sac in the aft walkway, all 3 factory ballast full, and we brought a 110L yeti, placed in front of the rear seat, filled and closed. The wave was OKAY, but not really large enough, or ample push. there was curling, and I feel with 1 extra person, we might be alot closer