Thought I would share the valve I installed to run the engine while on the trailer.
This is a 2-way "in" ball valve with a hose thread adapter on one inlet. If I used this often, I would add a hose run to an inlet on the gunwale. After having a plastic Perco break on my old boat while on the water, I opted for a more durable solution.
The intake valve is super accessible on the 230 under the round access panel at the rear seat walkthrough, so it is easy to get to.
This is a 2-way "in" ball valve with a hose thread adapter on one inlet. If I used this often, I would add a hose run to an inlet on the gunwale. After having a plastic Perco break on my old boat while on the water, I opted for a more durable solution.
The intake valve is super accessible on the 230 under the round access panel at the rear seat walkthrough, so it is easy to get to.
Attached Files