Announcement

Collapse
No announcement yet.

2005 SANTE 210 Teak Swim Platform Restoration

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2005 SANTE 210 Teak Swim Platform Restoration

    Decided to restore my teak platform as my first project this season. PO had applied polly ( Big No ) so I used deck stripper and scraped for a couple hours. After removing most of the polly I used Olympic deck cleaner and gave it a good scrub with a wire brush then rinsed off with water. After allowing it to completely dry I then sanded with 150 , rinsed again and let dry, then sanded again to 320. I will continue up to 600 grit , then wet sand with the teak oil to about 800. Here is a pic of the bottom before striping the poly, and the platform drying after sanding to 320 and rinsing it.
    Attached Files

  • #2
    Any pictures of the final product? I’m about to do the same project...


    Sent from my iPhone using Tapatalk

    Comment

    Working...
    X