Announcement

Collapse
No announcement yet.

Diy surf gates SANTE 210 2011

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Has anybody done this with the original SAN? I think something like this would be really cool instead of a suck gate.

    Comment


    • #17
      Which lenco actuator did you use, the standard 101 actuator?

      Comment


      • #18
        Which actuators did you use? The 2-1/4 or 4-1/2?

        Comment


        • #19
          I used 4.5 both boats. 210 was done more recently and I used the faster ones. They are a little nicer for switching wakes while surfing. Because of the difference in hull designs I didn't need the full 4.5 on the 210 but did on 211. On the 210 I only run out 3/4 of the ram full extension is too much and comprises the clean wake

          Comment


          • #20
            This is great man I’m going to be doing this over the winter to my 06 Super Air Nautique 210

            Comment


            • #21
              Originally posted by 06OGsan210 View Post
              This is great man I’m going to be doing this over the winter to my 06 Super Air Nautique 210
              Did you happen to do this over the winter?


              Sent from my iPhone using Tapatalk

              Comment

              Working...
              X