Announcement

Collapse
No announcement yet.

Home made board racks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Home made board racks

    Click image for larger version

Name:	image.jpeg
Views:	279
Size:	104.0 KB
ID:	509594Click image for larger version  Name:	image.jpeg Views:	1 Size:	55.1 KB ID:	509588 Thought I would try my hand at some homemade board racks. Started with a piece of 2'' x 1/8'' metal stock, leftover foam decking, and red spray paint. I think they turned out pretty good. Can't wait to give them a try as soon as it warms up.
    Last edited by Cram; 01-29-2017, 09:27 PM.

  • #2
    Came out nice

    Comment


    • #3
      Great job those turned out pretty nice!
      2009 Super Air Nautique 210 TE
      2006 Super Air Nautique 210 TE
      1989 Sport Nautique

      Comment


      • #4
        Thank you for the comments.

        Comment


        • #5
          how are they going to clamp to the tower?

          Comment


          • #6
            jtryon,

            They will bolt to the support between the two tower uprights. I'm using stainless bolts with nylock nuts and a rubber washer between metal surfaces. Very similar to the way the Nautique board clips are installed. Cram

            Comment


            • #7
              These look awesome. Not all like DIY jobs.
              Current : 2000 Pro Air Nautique, Silver&Black accents, pulled by 2012 black Chevy Tahoe
              Previous: 1990 Ski Nautique

              Comment


              • #8
                DLafont,

                Thank you!

                Cram

                Comment


                • #9
                  Click image for larger version

Name:	image.jpeg
Views:	234
Size:	49.3 KB
ID:	510048Click image for larger version

Name:	image.jpeg
Views:	249
Size:	76.1 KB
ID:	510049 I got the board racks on the boat today. Had everything powder coated.

                  Comment


                  • #10
                    Made the decision to use the stock swivel mounts. Was going to solid mount to the tower. This way makes getting to the boards a lot easier.

                    Comment


                    • #11
                      Those look amazing

                      Comment


                      • #12
                        Nice Work! What are you using as a bungee to secure the boards to the racks?

                        Comment


                        • #13
                          Dandy21- My bungee from the stock swivel racks were still good, so I used them.

                          Comment

                          Working...
                          X