disabling perfect pass?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fattymrm999
    • Mar 2007
    • 19

    • Denver, CO

    • 2006 SANTE 210
    #1

    disabling perfect pass?

    I'm trying to figure out a stalling problem that my 06 SANTE is having. I've been going down the list of possible causes and would like to single out the Perfect Pass to see if it could be the cause. My question is, How can I unhook/disable the perfect pass? Is there a fuse I can pull? Or do I have to unhook the wiring on the back of the Faria gauge? Your advice is appreciated.

    Thanks,
    Matt
    Tags: None
    • NCH2oSki
      1,000 Post Club Member
      • Jul 2003
      • 1159

      • Maryville, TN

      • 2005 ski nautique 206 SE
      #2
      RE: disabling perfect pass?

      Why not just turn it off?
      2005 Ski Nautique 206 SE, Acme 422, PP SG 8.0, ND Tower
      2011 strada with strada bindings

      Prior Boats:
      1986 Sunbird skier with 150 Evinrude VRO
      1992 Mastercraft prostar 190, with Powerslot
      1999 Ski Nautique GT-40
      1999 Sport Nautique, GT-40 FCT,



      www.skiersofknoxville.org

        Comment

        • fattymrm999
          • Mar 2007
          • 19

          • Denver, CO

          • 2006 SANTE 210
          #3
          RE: disabling perfect pass?

          my problem occurs even when it is off. I have a suspicion that even though it is turned off a problem with the PP computer may affect the throttle on the boat. When perfect pass is switched off and I hit a bump, it beeps and I lose all throttle control and the boat returns to idle. I checked the wires on the back and they seem to be tight.

            Comment

            • ag4ever
              1,000 Post Club Member
              • Feb 2004
              • 1180


              #4
              RE: disabling perfect pass?

              Unplug the wiring to the PP box. I assume it is under the dash and easily accessible.

                Comment

                • skiinxs
                  Senior Member of PLANETNAUTIQUE
                  • Jul 2003
                  • 374

                  • St. Louis

                  • 2019 Ski Nautique 6.2 arriving soon
                  #5
                  RE: disabling perfect pass?

                  In 06 there is no perfectpass box, just the in-dash display and the program chip that lives in the Faria gateway box. With the throttle by wire systems, there is not a lot of hardware involved in Perfectpass. In dash display, chip in Faria box, paddle wheel, (and slalom/jump timer(s) and rope switch if used)
                  Dave
                  2019 Ski Nautique 6.2 arriving soon
                  16 other Ski Nautiques
                  3 MasterCrafts
                  18 Ski Supreme's
                  1 SlickCraft Squirt Boat

                    Comment

                    • fattymrm999
                      • Mar 2007
                      • 19

                      • Denver, CO

                      • 2006 SANTE 210
                      #6
                      RE: disabling perfect pass?

                      can the chip be pulled from the faria box?

                        Comment

                        • boatech
                          • Aug 2006
                          • 247


                          #7
                          RE: disabling perfect pass?

                          pcm sent out a tsb for this problem call them they will help you. or give me a couple of days and ill track it down for you.

                            Comment

                            • fattymrm999
                              • Mar 2007
                              • 19

                              • Denver, CO

                              • 2006 SANTE 210
                              #8
                              RE: disabling perfect pass?

                              that would be very helpful, let me know what you find.

                                Comment

                                • itssh0rty
                                  • Aug 2009
                                  • 2


                                  #9
                                  RE: disabling perfect pass?

                                  I am having similar problems on my 2004 210 Air Nautique. When Perfect Pass is on, the boat will be running fine and then all of a sudden stall. PP goes blank, all of the dash lights go off, but the boat never goes dead. I bring the boat to neutral and then resume speed just fine. It does this sporadically. At other times, PP will randomly beep and reset itself, but the boat doesn't stall. These problems occur regardless if PP is on or off. Any suggestions would be great!

                                    Comment

                                    • TaylorAirNautique226
                                      • May 2020
                                      • 1

                                      • Seattle

                                      • 2007 Air Nautique 226 TE
                                      #10
                                      I’m currently having this issue with my 07 226. Any insight so I don’t have to reach out to PCM, would be greatly appreciated. My boat stops when I go full throttle, but I can gradually get up to speed. Seemed to have started after calibrating my speeds on both the PP and Speedo.

                                      thanks

                                        Comment

                                        Previous template Next
                                        Working...
                                        X