Took delivery on a 2025 GSS 5 weeks ago. Have tubed/skied handful of times off pop up pylon.
running into issues where it’s stuck in the down position. I can use a channel lock over a rag to undo it but the “press and twist” operation does not work.
I can’t find anything on a grease zerk and from the engine compartment I haven’t ID’d any calibration/adjustment options.
Anyone else run into this issue?
running into issues where it’s stuck in the down position. I can use a channel lock over a rag to undo it but the “press and twist” operation does not work.
I can’t find anything on a grease zerk and from the engine compartment I haven’t ID’d any calibration/adjustment options.
Anyone else run into this issue?