I currently have an 04’ 210 and I have our boat lift bunks set up for it. I’m getting a 22’ G23 in a week and need to change the setup on the boat lift. I understand I will need to widen the bunks considerably. I’m also trying to find if I need to double the bunk on each side. I currently have 1- 2x8 for each bunk. Should I go with 2 on each side? If anyone has any recommendations or pictures of their boat lift please post. Thanks!
-
Last edited by AirtoMud; 2 weeks ago. -
I would match your trailer spacing. My word of caution is to make sure the front cross member clears any tracking fins and that the rear cross member clears the shaft. I also like to have the bunks extend rearward, or the boat forward enough, to support all the weight at the rear of the boat.
Comment