Tweet
Looking for technical information on how the start sequence is initiated. Our 2013 200 with a PCM engine has a hanging starter issue. When the starter button is depressed the starter will stay engaged. Pressing the stop button will turn it off. I have installed a work-around by adding a second momentary switch in series with the transmission gear switch.
I have checked:
Relay above the engine.
Connections between the circular connector and the relay.
The yellow/Red wire is staying hot after the engine has started.
Tim
I have checked:
Relay above the engine.
Connections between the circular connector and the relay.
The yellow/Red wire is staying hot after the engine has started.
Tim