After reading up on all the power and ground wiring challenges, I have been working on a diagram to rewire my new to me 2000 SN. I would greatly appreciate any feedback on it though. Here it is:
-
-
That looks pretty well laid out. I don't really have any comments. I know there are some others that have bypassed their keypads on the site in case they stop working. -
Have you completed the rewiring of your boat? How did it come out? How long did it take you? I bought a 2000 SN 196 a couple of years ago and wonder about rewiring it.Comment
-
machyy1 I'm having a wiring issue with my 2000 SAN, and wondering if you could help out.
Both relays for the sundeck had been completely disconnected, and I've searched for some explaining how to wire a linear actuator with 2 relays and not finding much help. I've found a post that explains what wires should be connected, but each time I try to follow it, I blow fuses. I think I am struggling with the jumpers on the ground wires. The only posts I could find online don't have pictures, of the wiring setup of the relays -
So I'm hoping to find some good photos of a correctly wired set of relays for the sundeck.
TIA!
Comment
-
I found out what was going on. I had a bad relay stuck in an open position which was causing problems. Thinking I must have it wrong, I moved things around and blew fuses. Once I got the relay replaced, standard polarity reverse with relays worked! For anyone searching in the future, wiring is as follows:
Relay 1
actuator red - 30
ground - 85
ground jumper - 87a
switch/signal - 86
12v positive - 87
Relay 2
actuator black - 30
ground - 85
ground jumper - 87a
switch/signal - 86
12v positive - 87Comment
Comment