Tweet
we own an 01 SAN and i was looking for some advice and tips on how to add a heater and where i should put it, also if anyone has any information/ tips on a hot water shower or air dam that would be much appreciated
-
-
RE: Heater/air dam/shower
The stock mounting location is behind the drivers kick panel. Our SAN had a 2 vent heater, one was spit between the a window defroster, and drivers kick panel. Another one that ran through the bow over to behind the drivers side combing pad. Ag4ever made this great thread.
Shower is pretty simple too, one end of it will replace the port main block plug (hot water feed.) and the other feed (cold) can come off of the hose that runs from the raw water intake to the raw water pump.
Air dam can be done by getting a piece of lexan and some guides from your Malibu dealership. IMO the solid blocker is far superior to the vinyl. Grant West did a great write up on doing this.
Not to bash you or anything, all of your questions have really good threads with a ton of info in them. You can save yourself a ton of time by just searching the forums.How about \"Chales\"?
RIP Nikolai (\'05 SANTE) 5/23/05 - 4/30/06 -
Comment
Comment