Aftermarket Yacht Thruster - Easy Drive Model

[GMLIII]

I work with the company. This thruster will require mounting the thruster using a 2" hole, however it is all sealed. Our kit is supplied with mounting hardware and rubber bushings to completely seal the unit upon fastening.
This unit will be a very simple install, we provide as mentioned a complete install kit, including IP rated power box, fuse, harness, and joystick control. We will also be releasing later this year a wireless remote which will enable user to maneuver boat from anywhere on board, allowing easy pick up, docking, maneuvering boat onto trailer etc.
We have a full service and sales team ready to answer any questions.

Please let me know if you guys may need any assistance.

I can assure you this time next year you will hear about this unit quite often considering the performance we offer paired with the very competitive price point.

Again my name is Brian if you guys have any questions just let me know!

Brian on the demo Yacht Thrusters which are being installed on the White Lake Marine Nautiques, how are they dealing with the loss in efficiences produced from the thrusters by the air bubbles generated by the surf pipe? I have attached a visual of the stock thrusters showing the auxiliary exhausted used during idle. Obviously any potential purchaser of a Yacht Thrusters , who has a Nautique would not want to install an auxiliary exhaust to make the thruster more efficient.

[wakebrian]

Yep Reed Griggs is the man at Websters. I'm there all the time and he knows my 2017 G23 (The Destroyer). The sale manager is the owner, Mark Mills. My name- George Lupton

Great he is looking out for your call. Give us a shout if you have any questions!

[GMLIII]

White Lake Marine will have videos/photos available next week. I also took the time to reach out to Webster and spoke with Reed the Service Manager who was very impressed with our system. He would be more than happy to do the installation for you and even wanted to speak with the Webster Sales manager on equipping a unit for themselves. Give him a call and ask for Reed, he mentioned he remembers all his Nautique customers!

Yep Reed Griggs is the man at Websters. I'm there all the time and he knows my 2017 G23 (The Destroyer). The sale manager is the owner, Mark Mills. My name- George Lupton

[wakebrian]

I think this forum would like to hear the results from White Lake Marine since they are a Nautique dealer from the demo units.. I purchased my boat, (Nautique G23) from Webster Marine on Smith Mountain Lake in Virginia and would be interested in possibility purchasing the Easy Drive model should they become a Yacht Thruster dealer which does the install.

White Lake Marine will have videos/photos available next week. I also took the time to reach out to Webster and spoke with Reed the Service Manager who was very impressed with our system. He would be more than happy to do the installation for you and even wanted to speak with the Webster Sales manager on equipping a unit for themselves. Give him a call and ask for Reed, he mentioned he remembers all his Nautique customers!

[GMLIII]

Our thruster is a 12v system that can be powered by your already on board battery. Our unit has an auto power off to avoid over heating, run times of 8mins continuous thrust until auto power off which would be followed by a 2 minute cool down mode. Now with that in mind I would not see anyone needing power for 8 minutes..
We have equipped these on several wake boats now. Including demo units for many dealer networks, one in your backyard actually ( White Lake Marine 6485 US Hwy 701 North
White Lake, NC 28337 )

I think this forum would like to hear the results from White Lake Marine since they are a Nautique dealer from the demo units.. I purchased my boat, (Nautique G23) from Webster Marine on Smith Mountain Lake in Virginia and would be interested in possibility purchasing the Easy Drive model should they become a Yacht Thruster dealer which does the install.

[wakebrian]

Our thruster is a 12v system that can be powered by your already on board battery. Our unit has an auto power off to avoid over heating, run times of 8mins continuous thrust until auto power off which would be followed by a 2 minute cool down mode. Now with that in mind I would not see anyone needing power for 8 minutes..
We have equipped these on several wake boats now. Including demo units for many dealer networks, one in your backyard actually ( White Lake Marine 6485 US Hwy 701 North
White Lake, NC 28337 )

[Infinity]

One of my first questions reading the ad....was how is the thruster powered since it talks about how you can run it at 100% for 8mins or continuous thrust at 80%? So is it a self-contained battery that you have to somehow charge, or hooked to the battery somehow and if so, why is there a time limit....just so you do not run out the battery? Also wondering if it runs on the 12 volt, or if there is some sort of converter for the power (for instance like the Liquid Lumins lights that convert to 24v).

Looks pretty cool, wonder how much of a guinea pig you would be at this stage in the release?

[wakebrian]

I work with the company. This thruster will require mounting the thruster using a 2" hole, however it is all sealed. Our kit is supplied with mounting hardware and rubber bushings to completely seal the unit upon fastening.
This unit will be a very simple install, we provide as mentioned a complete install kit, including IP rated power box, fuse, harness, and joystick control. We will also be releasing later this year a wireless remote which will enable user to maneuver boat from anywhere on board, allowing easy pick up, docking, maneuvering boat onto trailer etc.
We have a full service and sales team ready to answer any questions.

Please let me know if you guys may need any assistance.

I can assure you this time next year you will hear about this unit quite often considering the performance we offer paired with the very competitive price point.

Again my name is Brian if you guys have any questions just let me know!

[functionoverfashion]

Having driven a 24' v-drive wooden boat that had a bow thruster, man, it was awesome. Of course it wasn't strictly necessary, but wow, it was so easy to maneuver. If you could do it for reasonable money I wouldn't hesitate.

[GMLIII]

The website says - "No fiberglass work"- which means you don't have to repair any gelcoat or fiberglass - it doesn't mean you don't have to drill a hole.

Thanks for clarifying. I guess I was wishing for a feature which does not exist

[thejean]

Following

[MikeC]

The website says - "No fiberglass work"- which means you don't have to repair any gelcoat or fiberglass - it doesn't mean you don't have to drill a hole.

[Shawn Henderson]

I'm surprised they have taken so long to become an option with inboard wake/surf boats.

[GMLIII]

If that is the case a no go for me. The Easy Drive model appears to not require any fiberglass penetration but there again their info is sketchy at best . 36 hours later I have yet to receive a return phone call from them. They need some customer service coaching none the less.

[blueroom]

A 2 inch hole? Dang, thats a serious hole.