2005 226 team edition Engine Cranks, will not start (ZR6) HELP

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tfo1515
    • Mar 2012
    • 5

    • San Francisco


    #1

    2005 226 team edition Engine Cranks, will not start (ZR6) HELP

    Engine light came on; went into limp mode. I took it in to dealer who said they could not get it to repeat the problem.

    Seems to be intermittent problem. Starts and runs for a short time, then the problem is now getting it to start; engine turns over, will not start. Took it back to dealer: replaced low pressure fuel pump. Now we have the same problem. Bi passed kill switch. Still will not start.

    Any ideas ?

    Currently starting one week vacation; very frustrating.
  • bscott
    • Apr 2005
    • 188

    • Bolingbrook, IL

    • 2014 Sport Nautique 2000 Sport Nautique

    #2
    Look at the things that cause it to go into limp mode. Maybe the oil press or temp switch are going bad. Try bypassing one at a time and see if the problem still pops up.

    Comment

    • ddipert
      • Nov 2013
      • 116

      • Mebane NC

      • 2010 SANTE 230

      #3
      Need to narrow down to not having one of these (fuel, spark, or compression). I'd say compression isn't your issue but never hurts to check it. Use a spark checker (or an old spark plug, make sure it's grounded) to see if you have spark. Pull the fuel injectors from the manifold to check fuel. Lots of things could cause not starting but you need to narrow it down a little more.

      Comment

      • tfo1515
        • Mar 2012
        • 5

        • San Francisco


        #4
        Originally posted by ddipert View Post
        Need to narrow down to not having one of these (fuel, spark, or compression). I'd say compression isn't your issue but never hurts to check it. Use a spark checker (or an old spark plug, make sure it's grounded) to see if you have spark. Pull the fuel injectors from the manifold to check fuel. Lots of things could cause not starting but you need to narrow it down a little more.
        Replaced oil pressure sensor after limp mode problem. Ran fine. Now the issue with not starting. Will check spark and fuel injectors next. Thanks for the help.

        Comment

        • skirvind
          • Nov 2008
          • 16

          • Oregon

          • 2014 200OB Team 2005 196 Limited

          #5
          Try the fuel pump relay

          Sent from my SAMSUNG-SM-G900A using Tapatalk

          Comment

          Working...
          X