I just got my 2004 SV211 out on the water for the first time this weekend and noticed there is a lot of play in the steering (like 3-4 inches). It doesn't feel stiff so I'm not sure if I need to replace the cable. Does anyone know if there is a way to adjust the 'play' out of the steering?
-
-
There's a rectangular bar underneath the helm. That contains the rack and pinion part of the steering. It might be loose and not fully engaging with the gear on the steering column. -
my 1999 with 400 hrs is the same way. I would love to fix this, makes it hard to pull a rider!Comment
-
Check the steering cable bar and steering cable attachment. https://onedrive.live.com/redir?resi...int=video,.mp4
Sent from my RM-877_nam_att_205 using TapatalkComment
-
Thanks jhersey29! Great video. I'll check that this weekend.
Quick question though. How are you accessing the that area? Did you pull up the floor because I can't seem to find it.Last edited by Alpine331; 05-06-2014, 10:09 AM.Comment
-
That is the top side of the rudder so on a v-drive it's under the engine/exhaust. If you have ballast tanks you may need to remove the tank on one side and the engine divider to get to it. I can't remember for sure but I think it might be easier to access from the starboard side.Originally posted by Alpine331 View PostShawn
2012 Blue Metal Flake SAN 230
1999 Black and Tan Python 502 Powered Super Sport (for Sale)Comment
-
Remove the motor cover by opening it up and pulling the 2 holders. On my boat they don't screw in 1999 Nautique.
Remote the rear seat. On mine you just lift them up and there is an attachment on both sides
Lift up on the floor board it. Should just lift up. Start lifting at the motor end.
Mine is a bit older so would bet it's a bit easier to access.Last edited by jhersey29; 05-06-2014, 01:19 PM.Comment
-
Ok, I'll have a look at it tonight. I'm quickly learning that you have to be a midget with gumby arms to work on these boats!Comment
Comment