I keep getting a low oil pressure warning on the digital readout. The check engine light has come on and will not cut off, but it doesn't put me in limp mode. Pressure seems normal on on start up and running (between 37psi-65psi). It seems to jump around at idle and set the alarm off. Any ideas?
X
-
My 08 210 does the exact same thing. Initially, I thought I was going to have to clear the code in the computer to make the warning light go off. Then I talked with Tommy from White Lake. He said that the red light is probably due to a malfunctioning sensor. He said it is pretty common. I haven't done the troubleshooting on mine (disconnecting the sensor) yet due to just not having the time, but the oil pressure reading on the digital gauge is from a different sensor, and it should be accurate. If it is reading low oil and blinking red, you probably need to add some oil. I always carry some extra oil and a few towels and periodically check the oil the old fashioned way...
Comment
Comment