I bought a used SAN 2000 with ski pole attached amidship. The first time we used it, it seemed to stretch rearward quite a bit. So I opened the ski locker and looked at the attachment. About 5 inches up from the inside hull is a heavy metal piece with two U-clamps bolting the ski pylon to it. The ski pylon does not extend all the way down to the hull. However, 5 inches below this point, is another, smaller piece of metal with two holes through it, which looks like it should likewise have a U-clamp holding onto the ski pylon had it extended that far. It seems to me the whole thing would be more stable if I loosen the upper clamps, lower the ski pylon, add another clamp at the bottam, then tighten everything. Does anyone know about this? Jeff
X
Comment