Welcome to PLANETNAUTIQUE! We're glad you're here. In order to participate in our discussions, you must register for a free account. With over 25,000 registered members already, we would love to have you as a member too! Click here to access our Registration Page. Registration is quick and easy, and we keep any information you give us completely confidential. Once registered, you may sign in using the drop-down Login or Sign Up window at the upper right corner of the site.
MIcro turners have hard failed again for the 3rd time in 6 months ..... Anyone have a fix thats working for this>? getting very frustrating taking boat to dealer
I have't heard of this as a common failure point. What kind of failure are you seeing?
Please do not PM me directly asking for advice on how to repair your boat. While I would love to help everyone, I simply do not have time to respond to all of the inquiries. Please post your questions on the forum, so that all of our members have a chance to answer.
I own and operate Silver Cove Marine, which is an inboard boat restoration, service, and sales facility located in Mooresville, North Carolina.
We specialize in Nautique and Correct Craft restorations, and also provide general service for Nautiques fifteen years old and older.
If we can be of service to you, please contact us anytime!
I have seen NSS plates cause a fault like that, and it turned out they were actually over-tightened at the factory, causing too much drag when deploying. I wonder if this issue is similar.
Please do not PM me directly asking for advice on how to repair your boat. While I would love to help everyone, I simply do not have time to respond to all of the inquiries. Please post your questions on the forum, so that all of our members have a chance to answer.
I own and operate Silver Cove Marine, which is an inboard boat restoration, service, and sales facility located in Mooresville, North Carolina.
We specialize in Nautique and Correct Craft restorations, and also provide general service for Nautiques fifteen years old and older.
If we can be of service to you, please contact us anytime!
Comment