2007 Super Air Nautique Team 220 has two swivel wake board racks. I want to replace one set of tines with wake surf tines. Can Roswell surf tines be used to replace the original?
-
-
Depends on your swivel type. Take pucture of your swivels and send to Roswell before you purchase tines. I did this approach before I purchased my upgraded tines for my G23. Their customer service was helpfulOriginally posted by Stephenmorgan View Post -
Will do. ThanksComment
-
I had a tine break (2008 super air 220) and just communicated with Nautique parts about the same issue. They have a set of tines that holds one wake board and one surf board that fits the same bolt pattern. Reach out to them as well.
Josh
Sent from my iPhone using PLT NautiqueComment
-
Another piece of advice. If you are going to spend the money on new tines which are not cheap, you might as well get the tines that have the ability to hold 2 wakesurf boards vs one wakesurf board and one wakeboard. Why? Becuase the ones that can hold 2 wakesurf boards can also hold wakeboards as well. They don't cost anymore and I think if you don't get this design, you will be sorry later. JMHO.Originally posted by Stephenmorgan View PostComment
-
The rack from Roswell will fit on the swivel from Nautique (which is in reality a swivel from Roswell).
I replaced mine with surf racks from Roswell but you need the complete rack ( 2 tines with backing plate).Comment
-
Thanks for the information. The Roswell set has two tines with the screws on yhe Overtons website. No backing plate. It looks as though I can remove the screws on the back of the existing and replace with the Roswell.Comment
-
Another option to consider is a bimini with surf pockets, they're a much better way to protect your boards and having some shade never hurts on those really hot days.Comment
Comment