Lift with cables not cradles

[btouchstone01]

After much debate and discussion I decided to go with the old school method of lifting a Nautique. (All of the rigging capacity was carefully verified) cradle

Sent from my SAMSUNG-SM-G930A using PLT Nautique mobile app

[GMLIII]

Nice set up

[charlesml3]

It'll be just fine. You even have lines rigged to stop the sway. For decades, this was THE way ski boats were lifted. The cradles came along later.

-Charles

[scottb7]

One would hope it would work. Charles is correct, but these are the heaviest nautiques to be lifted this way. Hopefully it is a different company that makes the lift ring hardware than that makes the prop shafts, just sayin'.

[btouchstone01]

200v... not very heavy compared to other boats in the Nautique fleet

Sent from my SAMSUNG-SM-G930A using PLT Nautique mobile app

[chrisschweda]

thats how I lifted my G23 in fact when I call nautique this is the recommended way to lift boat

[72Miles]

I like that look a lot btouch. Very clean. I have the cradle in my boathouse but this eliminates the boat sitting unlevel on the cradle. In my case when the water is low, my cradle will hit mud if I lower it far enough. I like this look.