Nautique Transport NC to AZ

[jguanciale]

Anyone have any experience with transporting boat cross country? 2002 SN with folding Flight Tower, White Lake Marina, NC to Bullhead City, AZ. Prices seem a little high. Greater than $3500 for transport on a flatbed. Any contacts would be appreciated.

[scottb7]

i used wade albert from uship.com for like $1000 from dallas tx to burnsville mn...

[Rick]

Uship .com works well. I sent some furnature (sofa, queen bed) from Albuquerque to SF for $300.00 He was going to pick up a truck he would have had room for a boat and trailer.

[HS]

Bill Mann Transport, Palm Desert, CA.

[jjsaustin]

I used uShip as well from CA to TX. It was my first time and it went smooth. About $1200 to have a reputable, insured carrier it tow behind a box truck (this protected the boat somewhat from the wind/debris). I would recommend travelling with the tower up.

I forgot the name though.

[relax230]

I also used uship.com as well from FL to Lakeville MN. Went smooth!! GL

[OKWAKEBDR]

I purchased the 2012 PN 210 just a few months ago. The boat was shipped from White Lake, NC to my house in Houston, TX. I used UShip.com and found a shipper located in NC. If you contact him directly, you can get a much better deal than going through UShip. I highly recommend him. He did a terrific job; his communication was great (he personally answered the phone every time I called); he's fully insured and provided me a copy of his insurance certificate before he picked up the boat; he even moved up the ship date at the last minute at my request. Cost me about $1400, but would have been cheaper if I went directly through him (rather than UShip).

His name is Harry LeBar with Lake Norman Transport. 704-975-2876

http://www.mylakenormantransport.com/

He will tow the boat on its own trailer (not on a flatbed).

[jguanciale]

Thanks everyone for your input!

[ers906]

Used Uship a few years ago to get my 210 from chicago to Phoenix for 800$. on time, and other than a bit dusty worked well. If you like I can look for the guys name in my files.

[kmgs]

Anyone have any experience with transporting boat cross country? 2002 SN with folding Flight Tower, White Lake Marina, NC to Bullhead City, AZ. Prices seem a little high. Greater than $3500 for transport on a flatbed. Any contacts would be appreciated.

John Collins from uship.com transported my boat from TX to TN - and did an awesome job! Unsure if he had a flatbed or not.

Service provider: jetjamr
Name: John Collins
Email address: jcollins@swfdallas.com
Phone: (972) 672-7800

[kmgs]

John Collins from uship.com transported my boat from TX to TN - and did an awesome job! Unsure if he had a flatbed or not.

Service provider: jetjamr
Name: John Collins
Email address: jcollins@swfdallas.com
Phone: (972) 672-7800

Total cost was about $1.40 per mile, but that was for 670 miles, so you might get greater economies of scale with the longer distance.

[JayG80]

My neighbor sold his boat near Houston Texas in 2010 to a couple in Edmonton Canada. The buyers arranged for Showroom Transport to tow it to Montana/Canada border for $1,250. http://www.showroomtransport.com/default.asp

The driver had a dually diesel pickup and towed the boat on its own trailer. It is 1,900 miles or more.