Custom Built Side Billet Tower On Nautique 226

[riderite]

Just got some pictures back of a custom built side billet tower that we built for a customer and thought I would share some pictures.. I think this tower looks fantastic on this boat.

[TxJole]

Brett post so pics of those surf/wake fork for the spinner racks again I lost my pic and I need to order soon. Tower looks good BTW.

[riderite]

Brett post so pics of those surf/wake fork for the spinner racks again I lost my pic and I need to order soon. Tower looks good BTW.

Are you looking for a picture of the triple fork (wake/surf/wake) or just the standard combo forks (wake/surf)?

[riderite]

Tower tubing is all stainless steel and the side billets fold in half to be able to fold the tower down into the boat. The highest point being about three inches above the windshield where the hinges are..

[Miljack]

Tower tubing is all stainless steel and the side billets fold in half to be able to fold the tower down into the boat. The highest point being about three inches above the windshield where the hinges are..

Looks like the tower from a Sanger? Are you guys the OE supplier for those? Good looking work! Is that tower stiff from side to side with the speaker/light combo up there? Any closeup pics of the rack/spinner combo?

[TxJole]

Surf/wake double fork only to put on existing spinner racks

[riderite]

Yes we build that tower for Sanger & Supreme also. We also build accessories for Moomba, Supra, & Chaparral.. The spinners are built into the side billets, I will get some pics this afternoon and post them up.. And I will post a video of the tower..

[TxJole]

I know alot of people on here have asked me about a fork only replacment from the OEM wake/wake to a wake/surf combo. Like the combo you have on this boat but just the forks.

[TxJole]

Those are the ones, are they chromed and more squared edged then the old OEMs? I want them to look as factory as they can to a 07 or 08 set-up.

Here you go, in both a Vinyl and Polished finish..[ATTACH=CONFIG]15986[/ATTACH][ATTACH=CONFIG]15987[/ATTACH]

[riderite]

Surf/wake double fork only to put on existing spinner racks

Here you go in both a Vinyl & Polished finish..

[riderite]

Those are the ones, are they chromed and more squared edged then the old OEMs? I want them to look as factory as they can to a 07 or 08 set-up.

The forks are not chromed they have a polished finish. We do not manufacture them anymore with the rounded bottoms, just the style above that are cut in a little more.. This will be as close to factory look as you will get..

[TxJole]

3 screws??

[Miljack]

Could you PM a price to me, and the c-c distance for the 3 bolts? I have the CC spinners. thanks,

[riderite]

3 screws??

Yes they have the 3 bolt pattern, we have not changed our bolt pattern on forks since we used to build for Correct Craft..