Has anyone had an issue with the Sano grip rubbing off? I bought a 2007 SV211 and was sitting on the Sano grip on the transom and it rubbed off turning my orange shorts black. Didn't come out in the wash, either. I haven't noticed it peeling or cracking, but it is hard as a rock, that's for sure. Would like to replace with seadek or nau teak if available.
-
-
Yep. Known issue. There is a SeaDek kit for your platform. Contact NautiqueParts.com.Please do not PM me directly asking for advice on how to repair your boat. While I would love to help everyone, I simply do not have time to respond to all of the inquiries. Please post your questions on the forum, so that all of our members have a chance to answer.
I own and operate Silver Cove Marine, which is an inboard boat restoration, service, and sales facility located in Mooresville, North Carolina.
We specialize in Nautique and Correct Craft restorations, and also provide general service for Nautiques fifteen years old and older.
If we can be of service to you, please contact us anytime!
Current Boats —> 2026 Super Air Nautique G23 -- 2000 Nautique Super Sport PYTHON -- 1985 Sea Nautique 2700 (Twin-Engine, 1 of 13) -- 1981 Fish Nautique (Twin-Engine, 1 of 4) -- 1980 Fish Nautique (Twin-Engine, 1 of 4) -- 1978 Cuddy Nautique
Former Boats —> 2025 Super Air Nautique G23 -- 2024 Super Air Nautique G23 PARAGON -- 2023 Super Air Nautique G23 -- 2022 Super Air Nautique G23 PARAGON -- 2021 Super Air Nautique G23 -- 2021 Super Air Nautique G23 -- 2020 Super Air Nautique G23 -- 2019 Super Air Nautique G23 -- 2018 Super Air Nautique G23-- 2018 SAN 210 TE -- 2017 Super Air Nautique G23 -- 2016 Super Air Nautique G23 -- 2015 Super Air Nautique G23 -- 2014 Super Air Nautique G23 -- 2014 Super Air Nautique 230 Team Edition — 2013 Super Air Nautique G23 — 2012 Super Air Nautique 210 Team Edition — 2011 Super Air Nautique 210 Team Edition — 2010 Super Air Nautique 210 Team Edition — 2008 Super Air Nautique 230 Team Edition — 2007 Air Nautique 236 Team Edition -- 2007 Air Nautique SV-211 -- 2005 SV-211 -- 2003 Super Air Nautique 210 Team Edition -- 2003 Air Nautique 226 -- 2003 Sport Nautique 216 -- 2003 Ski Nautique 196 -- 2003 Ski Nautique 196-- 2002 Ski Nautique -- 2001 Sport Nautique -- 2001 Ski Nautique -- 2001 Ski Nautique -- 2000 Sport Nautique -- 2000 Nautique Super Sport -- 1999 Ski Nautique PYTHON -- 1999 Ski Nautique Open Bow -- 1999 Air Tique 176 -- 1998 Ski Nautique -- 1998 Ski Nautique -- 1998 Ski Nautique -- 1997 Ski Nautique -- 1997 Ski Nautique -- 1996 Ski Nautique Open Bow -- 1994 Ski Nautique -- 1993 Barefoot Nautique -- 1983 Fish Nautique (TWIN ENGINE, 1 of 4) -- 1981 Fish Nautique (SINGLE ENGINE)
Need something for your boat? Please check out our site sponsors! Not only do they offer the best products available, they also support this site.
Silver Cove Marine - NautiqueParts.com - Phoenix Trailers - SkiSafe - PCM Marine Engines - C&S Marine - OJ PropellersComment
-
I second the Sea Deck option. I don't think I would buy a boat with Sano on it, unless it was a great deal, so I could immediately replace it with Sea Deck... Don't wait till it cracks/peels then someone gets sliced by it. It tends to produce razor sharp edges...Comment
-
Sea Dek kits are availiable for the large 7 piece platform. I hate sano but the black seems to hold up better than the grey. The kits are also availiable for the 196 platform.[EMAIL="Zach@n3boatworks.com"]Zach@n3boatworks.com[/EMAIL]Comment
-
For those of you guys who are trying to get by and make the most of your Sano Pad material, I've had good luck by putting 303 on it like its going out of style. My boat is a 2008 and I have not had any issues with peeling or cracking. Its a pain, but if you can keep it soaked up with 303, it makes it somewhat tolerable to have on your boat. Still can't wait to have a boat with the Sea Deck though.....that stuff is really nice.Comment
-
I replaced all the sano & carpet in my 07 220 with seadek - the stuff is great! SeaDek now has the template of the entire 220...Comment
-
What is the process for removing the sano? Anyone have any experience with it that they could share? And I saw that I can get the seadek for my platform, but I am not seeing a kit for the transom sano. Would like to replace all of it with a kit (as opposed to cutting it out of a sheet on my own where it might be a little less than perfect). I have an '07 211. Again, though, I am very curious as to how I am going to get the sano off without harming the fiberglass/gelcoat.Comment
-
Answered my own question on sano removal. In case anyone needs it: http://www.planetnautique.com/vb3/sh...g-Sano-MattingOriginally posted by fuddbar View Post
Still curious about a template for the transom sano pieces, though...Comment
Comment