Boom on a Super Air Nautique

[BSBell]

Is there anyway to do this?

[Hollywood]

RE: Boom on a Super Air Nautique

Absolutely

You might not need the height adjuster, just couldn't find a picture w/o it.

[MikeC]

RE: Boom on a Super Air Nautique

There are a lot of options, check these links out. It just depends on where you want it mounted. I personally like the tower boom - no scuffs on the gelcoat; the rider is next to the driver; and it's not in the way. The downside is that it takes longer to mount and remove - there's no swinging by the dock and dropping it off quickly.
http://www.thefootersedge.com/equipment/tower_boom.html
http://www.waterskis.com/ProductDeta...V-Drive%20Boom

[HS]

RE: Boom on a Super Air Nautique

BSBell: Yes. Here is a pic of a BI Tower Boom on a 211

http://www.planetnautique.com/index....highlight=boom

Is that what you had in mind? Here is the BI site http://www.fatsac.com/Barefoot/BarefootProducts.html

Call Mike Seipel at BI and ask if he has any "seconds" and you'll save $

[BSBell]

RE: Boom on a Super Air Nautique

Well, I actually have a boom for a 211 stored away somewhere that I never opened, I wonder if it can work with a SAN 230???

[HS]

RE: Boom on a Super Air Nautique

I think it will depend on the tube diameter of your 230's tower .
phone:
800-932-0685
414-964-3668

fax:
414-964-5767

e-mail:
bifh@mindspring.com

From their website:
Tower Boom - W206 / W207 / W208 / W209 check product number for fitting
The only boom that was designed to be mounted on any tubular tower. This boom is rock solid and can be stowed by pulling three quick release pins and detaching the cable system from the bow. It can also be used to train new wakeboarders at slower speeds while an instructor directs them on what to do. (W206 fits 1.875” - 2” towers / W207 fits 2.25” - 2.5” towers / W208 - fits Cage / W209 - fits X-Star and X-80)

[Hollywood]

RE: Boom on a Super Air Nautique

He never said it was a tower boom.