How Customized is Your Boat?

[east tx skier]

Very cool. I'm not sure I have a good place to mount one on my 98 without some transom cutting unfortunately. I wonder how waterproof they are.

[Mikeski]

Not very waterproof, I have had to unplug mine after it got foggy after getting dripped on. I was forewarned by perfect pass. I actually have not used lately, it was more of an issue with the single line display.

Let's see some more costomized lists... Grant, will probably need two pages to do his...

[gride300]

2005 210 Team:

-wet sounds 3 some
-wet sounds xs 12
-wet sounds 420
-wet sounds syn 6 for 3some
-jl audio marine 500/1
-clarion 4 and 2 ch marine for in boat speakers
-red led courtesy lights
-plumbed in wedge sacs
-acme prop for super weighted boat
-nautique platform material for transom saver and deck saver
-velcro for ipod on dash(makes me laugh but it's nice

[SNMike]

On my 07, I added a 10" 200 watt Bazooka tube underneath the front bow, custom graphics on the bow and windshield.

On my 02 I completely redid the engine to match the boat including custom made graphics for the engine cover, and decals to replace the one ON the engine cover and exhaust manifold. Boy that was a job.

I also redid the entire outside graphics. I won best of show at Sea World in Orlando some years back with the 02.

The last pic is my 07.

Regards to ALL!!!
Mike

[bchesley]

Nice keep them coming. You guys have put some serious work into your boats. I am extremely impressed......

It looks like LEDs are going to be my next custom feature.

[MarkP]

I always liked the theme song to the Masters Stars on the Water. I had drip molded stars made for the sides and had a decal shop custom make these decals. I also added stainless cup holders and my next project is adding a tower when I get the cash to do so.

[kevfran99]

not much yet.....

so far only:
-JL 6 channel amp for the intreroir speakers
-Transom lights
-Hot/Cold shower
-3 fat sacs for surfing
-Tower Bimini
-Crest carpet (waiting for it to get here)

[SuperSquirt]

Just curious, did u get a hookup on your new carpet?

[JWAT]

1997 Super Sport

- Flight Control Tower
- Nautique Flight Clips
- Fusion Mirror Arm
- Monster Tower Quick Release Board Rack
- Perfect Pass Wakeboard Pro
- 1900 lb. Automatic Ballast System
- Aftermarket Head Unit with I-Pod hookup
- 12" Sub in Custom Box Under Dash running off JL Mono Amp
- New Interior Speakers
- Boss B-530 Tower Speakers Running off 2-Channel Amp
- Blue Top Battery
- Updated Throttle Knob
- Super Air Nautique Graphics
- 2-Outlet Heater
- Removed Ski Pylon in Middle of Boat
- Custom Fiberglass Swim Platform
- Traction Pads on Gunnels

[nautinautiboy]

Stereo:
5 zapco Amps
1 Zapco DSP
16 Zapco 6.5 comps
2 DD subs
1 alpine iPod deck

Boat:
Custom Passenger seat (only back flips up)
removed rear ballast 6 batteries and an ice chest replace them
custom driver side and foot kick walls
Painted shifter plate, throttle knob, Gauge plate, sterring wheel, stereo control plate and ignition plate

Tower:
3 piece tower box

Lighting:
every cup holder
Swim deck
front walkway
Dash guages

[Hollywood]

So far I really like east_tx_skier's functional jump seat and Mikeski's rear PP controller. I wish all my buds with their new fancy boats had this, I have no clue how to use PP!

For our 1988 Ski Nautique.
I changed out the bent, round top pylon to the factory trick/air pylon. Sold the factory pylon - oops!
Judges seats alongside the motorbox with an open/pass through base to straddle skis/boom/skylon
6x9 speaker boxes gunnel to floor.

These are more modern day upgrades rather than what I'd call "custom".
Added a Tachyon boom mount for the Skylon so I don't have to move the trick release and boom clamp anymore, ever.
Wired stereo remote for driver
Acme 540 prop
Shower
Winshield mirror clamp

Coming Soon:
Heater
New speaker boxes that don't go all the way down to the floor with integrated courtesy LEDs
New (padded and vinyled!) judge seats that resemble the factory CC jump seat with "2001" stiching instead of the N.

After this is all done, the boat is exactly where I want it performance wise. Drivetrain rebuild/upradges will eventually be needed and if I can ever find new graphics I'll wetsand and buff it all out. The carpet is matted down to a tile floor practically, I may make an overlay/runner system but don't feel the need to tear it all out. This thing is a ski boat, not a show boat.

[east tx skier]

So far I really like east_tx_skier's functional jump seat ....

Thanks! Good thing that it was functional because it was fairly heavy compared to the CC jump seats. It lives in Canada along with my old boat these days.

[core-rider]

'03 SANTE

Removed all exterior decals
Upgraded amp with custom sub enclosure behind driver's seat (2-10") and Kicker KMT6 tower speakers
LED lightning in various storage areas
Grey seat base on cooler seat (instead of white like factory makes it)
Limo tint on windshield
Gatorgrip on every gunwell walking surface and transome for board protection
Custom ballast added to factory ballast system

[bchesley]

Core you have one of my all time favorite boats. Not sure I would want to keep that thing clean, but sick sick boat......

[Chris4x4Gill2]

Core- I just noticed you were over here as well. From HSVRacing.......Justin right?