Under water lights 2009

[Chad52]

So what was the reason those lights had 5 LED's instead of 6 like the website showed?

Chad

[kevfran99]

So what was the reason those lights had 5 LED's instead of 6 like the website showed?

Chad

My fault......I never could get passed 2nd math! :mrgreen: They do have 6

[dizzyj]

no, the web page shows 6 and mine have 5. Could be that red draws more power? could be that my set were an initial run? donno.

[bulletlines]

Bullet Lines Underwater LED...

no, the web page shows 6 and mine have 5. Could be that red draws more power? could be that my set were an initial run? donno.

Our red LEDs come with 5 lights because of how much power the red LEDs draw. Our yellow LEDs will be the same 5 light design for the same reason.. The blue or white both have 6...

Thank you,

Ken Land
Bullet Lines
www.bulletlines.com

[saceone]

thanks for posting the pics, looks awesome

[helenewbold]

How long can the lights be out of the water while turned on? For example, if they were left on while running up on plane/surfing...how long can they remain dry without over-heating? They look awesome!

[kevfran99]

How long can the lights be out of the water while turned on? For example, if they were left on while running up on plane/surfing...how long can they remain dry without over-heating? They look awesome!

I just got off the phone with Ken @ Bulletlines. He said that as long as you mount them according to the directions you will be perfectly fine with the boat in the water weather you are sitting still or on plane. He doesn't reccomend using them for more than a few minutes out of water though.

I'm going to check out the interior lights on my boat, which I believe are white led's(two on the floor in the back and two on the rear steps. I want them to match these.) As soon as I confirm the exact color I will be ordering them from Ken this weekend!

210ga Want to help me install them?? I'm getting the heebies thinking about cutting into my boat already.....it's only got 5 hours!

[210GA]

Sure, I'll help as long as your the one cutting the holes. It still scares me but sure, I'll come help out with anything if your game. You still got my number right?

I'll get my buddy Jason to go with me if I can, he knows a good bit about all that stuff.

[kevfran99]

Sure, I'll help as long as your the one cutting the holes. It still scares me but sure, I'll come help out with anything if your game. You still got my number right?

I'll get my buddy Jason to go with me if I can, he knows a good bit about all that stuff.

Sounds good, maybe next weekend after I order them this weekend! I'll check my pm box.....should still have the number!

[Chad52]

Can somebody post a picture of the rear side of the lights and also perhaps a PDF of the installation instructions? I'm trying to understand how they mount and how much courage I would have to summon up before cutting into my transom.

Chad

[kevfran99]

how much courage I would have to summon up before cutting into my transom.

Chad

Just close your eyes and go for it! :mrgreen:

[saceone]

you guys need to videotape this stuff so I can see the emotions on your face haha

[dizzyj]

bah, I've had my new 236 for a month and I've already drilled 4 holes in it. 2 in the first week!

[LT206]

looks like Attwood is the OEM CC supplier
http://www.attwoodmarine.com/product...rname=Lighting

[kevfran99]

looks like Attwood is the OEM CC supplier
http://www.attwoodmarine.com/product...rname=Lighting

$199 each special ordered with west marine! Placed my order with Bulletlines today for $229 shipped for two. Much better deal! Will post pics once installed!