ACTIVE - New - Perfect Pass 5" display

[SilentSeven]

New, unused Perfect Pass 5" 'jumbo lcd' multiline display. This same unit sells new from Perfect Pass for $329.

Unit was removed from a complete, never used Perfect Pass Stargazer installation kit as the kit buyer needed the smaller 3.5" gauge. The Stargazer kit was 'new old stock' from 2020.

The covering you see in the pictures on the LCD display is from the factory. Unit was only removed from the factory bag for these photos.

Selling $190 which includes US ground shipping.

Pictures are of actual unit you will receive.

[raseyeguy1]

Will this gauge work with an earlier version of PerfectPass? Or can it only be used with Stargazer?

[SilentSeven]

Possibly. Can you share more information on your current setup? A picture of your current display and/or your control module would help.

Edit:

raseyeguy1 - saw elsewhere on the board you saying you have 2006 196 and a PP with a bad button. Any chance your PP is the DBW (Drive by Wire) version? If so, the DBW gauges are NLA from PP. This gauge won't connect to the DBW box. A picture of the plug end of gauge or the control model will quickly sort this out.

[raseyeguy1]

Gauge looks identical to mine. Boat is a 2007 Ski Nautique 206 Limited. I believe it is DBW. I won't be able to get to the boat and look at the plug till next week.
Thank you.

[SilentSeven]

OK. You'll want to get a picture of the master module and - as possible - the plug end of the gauge wire to the module. The DBW system uses a different module plug than the non DBW systems and reportedly the internal firmware is also different. You'll want to get these details as the external appearance of the gauge is identical.

[MN Ryan]

Very doubtful. The original display on my '07 died, and upgrading to Stargazer was the only option. Something about the chip from the original not being made anymore. You could call PP to confirm--they're extremely helpful.

[SilentSeven]

Bump. Still available.

[Wicked4x4]

I'm not sure what you mean when you ask for a picture of the master module. I do have a picture of the plug at the end of the PP gauge though.
I don't know if this is the drive by wire you mention, but it's certainly not a Stargazer model. My unit is the original from 2006 Team Edition SV211 that connects to the Faria Gateway - BUT, it has the paddlewheel speedometer, not the pitot that sends water into the Gateway.

So - let me know what you think, but I'm guessing not compatible

[SilentSeven]

Here's what a standalone PP master module looks like. If all your PP feeds (paddlewheel, display gauge) connect to the Faria box...you have one of the integrated units. It's possible on a 2006 boat.



Here's the plug end on my gauge - this is the standard end used on the current PP system.



You should call PP to see what your options are. I don't know for sure if the faria integrated speed control used an ECM interface (electronic CAN bus data signals directly to the engine's Engine Control Module) or the more traditional servo based throttle control. The ECM approach is known as the drive by wire system and is no longer supported by PP. I know if you have a standalone DBW master model you can't purchase a replacement display gauge that works. Maybe you can get one that plugs directly into the Faria box? PP would know.

If it turns out your system is not supported and you have to move to stargazer standalone, my gauge will work. It's also possible that you can fit a Zero Off on your engine.

PP tech support line is great. You'll likely talk to Mark. Give them a call.