Nautique Flight Control Tower For sale

[jamespjackson95]

Hey guys I have a Nautique flight control tower for sale. It has the rounded bottom piece and I believe it fits a 2004ish SAN or similar hulls but maybe you guys can tell me more. It has no speakers, or no board racks. I am asking $750 OBO. I purchased a boat that came with the tower, however it will not fit on my current boat. You will need to order or make your own backing plates and rubber mounting pieces as I do not have those. Also you will need a couple stainless nuts, bolts, washers, etc because I was not given those. You should be able to pick those up at any hardware store. If you have questions call or txt me at 864-309-5091. I am in Anderson, SC. I will soon post pictures and measure actual dimensions.

[astinespring]

Does anyone know if this will fit a 2001 Sport?
I am very interested.

[Donald80SN]

The Sport Nautique used the same hull from 97-2002 and I believe the same deck. There was a Flight Control Tower Generation 1 for 97, 98 and some of 99. In 99, 2000 , 2001 and 2002 there was a Flight Control Gen 2 that looks similar, but likely measures differently. The 2004 and early Sport Hulls and decks were different than before. There is a guy in this site that installed one of those on a Red 216 Sport in the last year or so but is was a 2003 I believe. It was the newer hull design. I am pretty sure. He is on Lake Norman where I boat.

[jamespjackson95]

If anyone needs dimensions please let me know.


Sent from my iPhone using Tapatalk

[Miljack]

Just a heads up for people considering this tower, that looks like it's from a SV211 because the back mounting "feet" are curved to wrap around the top contour of the deck. If you're intending to use this on another boat/hull, just check that radius, it may work great...Or you could have new flat mounting pads welded on the lower hoop to make it work.

[Ross-SV211]

That is the same tower that's on my 211 * to confirm


Sent from my iPhone using Tapatalk

[jamespjackson95]

*Bump price drop to $500. Different feet can be welded on to fit other boats


Sent from my iPhone using Tapatalk

[Jjwyatt]

Hi James Jackson, please could you tell me diameter on the tower, I want check what speakers will fit it. Thanks.

[jamespjackson95]

I believe it is 1 7/8"... I will not be back home to measure it until Thursday. Any speakers should fit that have an adjustable mount for 1.5-2". If others know the diameter feel free to chime in.


Sent from my iPhone using Tapatalk

[Jjwyatt]

Thanks James

[Jholly87]

If this I still available would you mind sending me some dimensions. I know I'll have to change the feet but I want to see if I can make it fit on my super sport. And also what is the height?

[jamespjackson95]

Yes I still have it for sale.
Front to front 68"
Front to rear 67"
Back to back 87"
Height 54.5"

[Jholly87]

Yes I still have it for sale.
Front to front 68"
Front to rear 67"
Back to back 87"
Height 54.5"

Thanks for the measurements. The rear is to wide to fit on my boat even if i welded different feet on it. Bummer

[xlair]

You can have a welder chop some out of the middle as well to make it work


Sent from my iPhone using PLANETNAUTIQUE mobile app

[Tryathlete]

I believe the front dimension will work. The rear could be made to work by bending the rear legs of the upper half inward to 76" or so to meet the narrower Super Sport gunwales. You don't have to weld new feet if you could make CNC machined aluminum feet to accept the curve and weld them to the underside of the curved feet. Alternately, cut the curves off and weld a flat piece on (way simpler). These things are not hard to do. This tower is very affordable.


Sent from my iPhone using PLANETNAUTIQUE mobile app